E3D V6 All-Metal HotEnd - 1.75mm Direct, 12V, Full Kit + Brass Nozzle Fun Pack
Key Features: Genuine E3D V6 HotEnd All metal heatbreak Better control over filament output Cartridge style heater block Includes Brass Nozzle Fun Pack! The V6 is E3D's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, the V6 ecosystem is suited for every application. The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless. This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK. Item Specifics 1 - V6 heatsink 1 - V6 heatbreak 1 - V6 nozzle 1 - V6 duct 1 - V6 aluminium heater block 1 - Heater cartridge 1 - Thermistor cartridge 1 - Thermistor extension cable 1 - 30x30x10 fan 1 - Thermal compound 1 - V6 fixings kit 1 - V6 silicone sock 1 - PTFE tubing (100mm) 1- Brass Nozzle Fun Pack Maximum temperature: 285ºC
E3D Plated Copper V6 Nozzle - 2.85mm x 0.40mm
Key Features: Designed for use in E3D V6 Hotend Rated up to 500degC Engineered for ultimate high temperature performance Copper Plated; an optimal material for situations where temperatures are too hot for a silicone sock. Made from a special high-temperature copper alloy with a softening point of well above 500°C, and with much-increased thermal conductivity, these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these nozzles have an advanced nickel-based plating, considerably reducing the adhesion of plastic to the nozzle. & nbsp; Copper has more than 3x the thermal conductivity of brass, and the copper alloy used by E3D has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can & #39; t handle. Item Specifics Nozzle Diameter: 0.40 mm Filament Size: 2.85 mm Material: Nickle Plated Copper Alloy
E3D Titan Prusa i3 Upgrade Kit
Key Features: Upgrade your standard i3 machine to the Titan with V6 hotend Machine requirements apply to this upgrade kit Unassembled upgrade kit Upgrade your Prusa i3-style 3D printer with this Titan/V6 HotEnd kit. Get all the lightweight performance, reliability and usability of a V6 on your i3 printer. Your Prusa upgrade printhead comes with the new standard thermistor from E3D and the new thermistor-compatible heater block, making the E3D ecosystem even more accessible than before, with easy change-overs for a range of printing methods. This upgrade kit is intended for us with a standard i3 printer. It is not suitable for use with the original I3 Mk2 / Mk2S or Mk3 as it does not have any means of attaching the PINDA sensor. Additionally, the mounting bracket for this upgrade is similar in design to that of the standard Aero-i3 upgrade kit, however, they are NOT interchangeable. Item Specifics 1 - 50x50x15mm 12V Fan 1 - Mounting bracket 1 - Idler Arm 1 - Standard Titan Extruder Kit 1 - V6 Hotend - 1.75 mm (Prusa Edition) 1 - Fixings Kit Machine Requirements 1. 8mm Rods using LM8UU Bearings (or similar) 2. 45mm Rod Spacing, ~15mm Belt Spacing 3. One bearing on the top rod, two on the bottom, or the other way around
Genuine E3D 24V 30mm DC Fan with Cable - Clear
Key Features: Genuine E3D parts Replacement for V6 and V6 Lite Clear housing 30mm 24V E3D DC Fans for your printer. Comes with a 1 meter fan cable. Item Specifics 1 - Clear 30mm 24V fan 1 - 1m fan cable
E3D Prusa V6 HotEnd - 1.75mm, 24V (MK3/MK3S)
Key Features: Fits MK3 and MK3S Provides more reliability with retractions when using the MMU Prusa heatbreak & thermistor Maximum temperature: 285°C Drop-in replacement Featuring a Prusa specific heatbreak with a custom internal geometry, providing more reliability with retractions when using the MMU. Ships with a Prusa specific thermistor with a pre-prepared extension cable for a drop-in replacement experience. This is a 24V HotEnd and is intended for function with a Prusa i3 MK3S or MK3 MMU2. Do not use this HotEnd with 12V Prusa's such as the MK2, MK 2.5 or MK2S as this may damage your printer. Kit Includes 1 - V6 HeatSink 1.75 mm 1 - Stainless steel Prusa HeatBreak 1 - Brass nozzle ( 1.75 mm x 0.4 mm) 1 - 40W, 24V heater cartridge 1 - V6 aluminum HeaterBlock 1 - Prusa specific thermistor cartridge 1 - Collet 1 - Collet clip 1 - V6 fixings kit 1 - M3 grub screw 1 - M3 washer 1 - Thermal paste This HotEnd does not come with the specific PTFE used by Prusa, please retain the PTFE from your existing HotEnd.
E3D Water-Cooling Barbed Adapter Kit
Key Features: Water-cooling tubing adaptor Use with water cooled hotend systems 5mm ID tubing to 2.5 mm ID nylon tubing Tubing adaptor for use with hotend watercooling systems. Connects Kraken tubing (8mm OD, 5mm ID)to nylon tubing (4mm OD, 2.5 mm ID). Item Specifics 2 - Barbed adaptors 2 - 1.75 mm Collet Clips 2 - 1.75 mm Embedded Collets
Genuine E3D V6 Stainless Steel HeatBreak - 1.75mm
Key Features: Genuine E3D parts Replacement for E3D V6 Hotend HeatBreak All metal stainless steel For use with 1.75 mm filaments A replacement all-metal stainless steel V6 HeatBreak. These HeatBreaks are the standard for E3D HotEnds such as V6, Titan Aero and Titan Aqua. They feature a refined internal surface finish to reduce extrusion force and improved reliability with retractions. Item Specifics 1 - 1.75 mm V6 HeatBreak Thermal paste is not included
E3D Brass V6 Nozzle - 1.75mm x 0.80mm
Key Features: Designed for use in E3D V6 Hotend Rated up to 300degC Made from brass; an optimal material for everyday printing Compatible with the Prusa 3D printers The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of retraction. The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size. A small nozzle tip gives you high precision, and a wide nozzle tip assists in the smooth printing of larger layers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. Brass nozzles, featuring E3D & rsquo; s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C. Item Specifics Nozzle Diameter: 0.80 mm Filament Size: 1.75 mm Material: Brass Fully compatible with the Prusa 3D printers
E3D V6 Nozzle Fun Pack - 2.85mm
Key Features: Experiment with with different layer heights and track widths Pack of 6 various brass nozzle 1 each of 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm, 0.50 mm, 0.60 mm 7mm Spanner wrench included in convenient storage tin Looking for a variety of brass nozzles? The nozzle fun pack contains a variety of nozzle diameters allowing you to experiment with different layer heights and track widths. E3D has included the full range of nozzles for those who want to explore the limits of high resolution printing with small nozzles, as well high speed high layer height printing with large nozzles. They & #39; ve even included their purpose-made E3D Nozzle spanner to make changing out the nozzles a breeze! These E3D V6 nozzles have an M6 thread and are compatible with the full V6 ecosystem and many other 3D printers, including the Prusa i3 Mk2. Item Specifics Filament Size: 2.85 mm 1 - 0.25 mm brass nozzle 1 - 0.30 mm brass nozzle 1 - 0.35 mm brass nozzle 1 - 0.50 mm brass nozzle 1 - 0.60 mm brass nozzle 1 - 0.80 mm brass nozzle 1 - E3D nozzle spanner
E3D Brass V6 Nozzle - 1.75mm x 0.50mm
Key Features: Designed for use in E3D V6 Hotend Rated up to 300degC Made from brass; an optimal material for everyday printing Compatible with the Prusa 3D printers The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of retraction. The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size. A small nozzle tip gives you high precision, and a wide nozzle tip assists in the smooth printing of larger layers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. Brass nozzles, featuring E3D & rsquo; s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C. Item Specifics Nozzle Diameter: 0.50 mm Filament Size: 1.75 mm Material: Brass Fully compatible with the Prusa 3D printers
Genuine E3D Collet Clips - 2.85mm (2 Pack)
Key Features: Genuine E3D Parts Hold your PTFE Bowden tubing tight in the collet with these collet clips Easily identify filament diameter with color coded clips Red - 2.85 mm filament These collet clips are designed to eliminate the backlash created by the collet in our embedded bowden couplings. The collet clip should be pushed under the plastic collar, where it stops any back and forth movement of PTFE tubing when extruding and retracting. This greatly improves the precision of the HotEnd. Item Specifics 2 - Collet Clips for 2.85 mm Collet
E3D Plated Copper Volcano Nozzle - 1.75mm x 1.00mm
Key Features: Designed for use in E3D Hotend with a Volcano Block Rated up to 500degC Engineered for ultimate high temperature performance Copper Plated; an optimal material for situations where temperatures are too hot for a silicone sock. Volcano nozzles are designed for the E3D Volcano heater block. From standard to super-fat layering, you & #39; ll be making stronger, faster and bigger prints in no time. This super fast printing nozzle prints large layer heights at extremely high flow rates. Volcano nozzles have extra-long heated meltzones for ultimate filament melt speeds. E3D have also carefully crafted the internal geometry tooptimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flatteningdown extra wide printed traces. Made from a special high-temperature copper alloy with a softening point of well above 500°C, and with much-increased thermal conductivity, these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these nozzles have an advanced nickel-based plating, considerably reducing the adhesion of plastic to the nozzle. Item Specifics Nozzle Diameter: 1.00 mm Filament Size: 1.75 mm Material: Nickel Plated Copper Alloy Requires a Hot End modified with a Volcano Not compatible with the V6, SuperVolcano or Cyclops heater blocks
E3D Plated Copper V6 Nozzle 1.75mm x 0.40mm
Key Features: Designed for use in E3D V6 Hotend Rated up to 500degC Engineered for ultimate high temperature performance Copper Plated; an optimal material for situations where temperatures are too hot for a silicone sock. Made from a special high-temperature copper alloy with a softening point of well above 500°C, and with much-increased thermal conductivity, these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these nozzles have an advanced nickel-based plating, considerably reducing the adhesion of plastic to the nozzle. Copper has more than 3x the thermal conductivity of brass, and the copper alloy used by E3D has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can & #39; t handle. Item Specifics Nozzle Diameter: 0.40 mm Filament Size: 1.75 mm Material: Nickle Plated Copper Alloy
Genuine E3D spoolWorks FleXD Semi-flexible TPU Filament - 1.75mm, 500g, Rose Red05
Key Features: High abrasion resistance Easy to print High shear strength Elastic and flexible Rich, solid color SpoolWorks FleXD is a bold, bright, fun filament with professional shock absorbing qualities. All the bouncy bendiness you want in a flexible, with the quality you can expect from E3D & #39; s spoolWorks brand. Like Edge, FleXD is a naturally transparent filament. This means that in addition to the strong, solid color you can expect with the entire spoolWorks range, you will also find that FleXD offers incredible pigmentation and color vibrancy. Like Edge, it can also be used with spoolWorks Scaffold support filament. It adheres well during printing and then peels away satisfyingly. Any remnants can be easily dissolved away with tap water. Put it to work with useful prints like mobile phone covers, keyboard protectors, and insoles, or enjoy printing bendy versions of objects like vases and benchys! Item Specifics Color: Red Filament Size: 1.75 mm Weight: 500g Print Temp: 220-240degC Print Bed Temp: 45-85degC Print Speed: 30% speed (15mm/s) Bed adhesion: glue stick Keep in mind, all 3D printers are unique so adjust settings to taste!
Genuine E3D Cyclops/Cyclops+ Heat Break
Key Features: Genuine E3D Parts Stainless Steel HeatBreak For use with Cyclops and Cyclops+ Only Available in 1.75 mm only Replacement Cyclops/ Cyclops+ stainless steel HeatBreaks. Item Specifics 1- 1.75 mm Cyclops/Cyclops+ HeatBreak Thermal paste is not supplied Please note: The Cyclops Hot End is a dual-input system and requires two heat breaks to function.
E3D Prusa i3 Aero Upgrade Kit with Motor
Key Features: Upgrade your standard i3 Machine to the Titan Aero Machine requirements apply to this upgrade kit Unassembled upgrade kit Available in 12V 1.75 mm only Compact but Powerful Motor included Upgrade your Prusa i3-style 3D printer with this Titan Aero two-in-one HotEnd and Extruder kit. Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own. This upgrade kit is intended for us with a standard i3 printer. It is not suitable for use with the original I3 Mk2 / Mk2S or Mk3 as it does not have any means of attaching the PINDA sensor. Additionally, the mounting bracket for this upgrade is similar in design to that of the standard V6-i3 upgrade kit, however, they are NOT interchangeable. Item Specifics 1 - 50x50x15mm 12V Side Blow Fan 1 - Printed i3 fan duct with attached cable 10 - cable ties 2 - M3x40 screws 1 - Printed i3 carriage mount 1 - Titan Motor 1 - Standard Titan Extruder Kit 1 - Standard Titan Aero Upgrade Kit 1 - Fixings Kit 1 - Thermistor Cartridge 1 - 12V 30W Heater Cartridge 1 - Molex Cable 1 - Standard V6 Silicone Sock 1 - V6 Aluminium Heater Block 1 - V6 HeatBreak 1 - Brass V6 Nozzle ( 0.4 mm) 1 - Compact but Powerful Motor Machine Requirements 1. 8mm Rods using LM8UU Bearings (or similar) 2. 45mm Rod Spacing, ~15mm Belt Spacing 3. One bearing on the top rod, two on the bottom, or the other way around
Genuine E3D V6 All-Metal HotEnd - 2.85mm Bowden, 12V, Assembled
Key Features: Genuine Fully Assembled E3D V6 HotEnd All metal heatbreak Cartridge style heater block Groove mount The V6 is E3D & #39; s flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you & rsquo; d like to experiment with more advanced materials or print at different resolutions and sizes, the V6 ecosystem is suited for every application. The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100 & rsquo; s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless. This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK. Item Specifics 1 - V6 HotEnd (Fully Assembled)
Genuine E3D Embedded Bowden Coupling for Metal - 2.85mm
Key Features: Genuine E3D parts Used in 2.85 mm V6 hotends Insert Bowden into Aluminum components These pneumatic fittings have a brass metal body which is designed to provide a simple and cost-effective way of inserting bowden tubing directly into your aluminum components. The couplings are designed to take PTFE tubing with an outer diameter of 1/4" ( 6.35 mm) for 2.85 mm filament The brass inserts push into an 0.528" (8mm) hole 0.181" (6mm) deep. These fittings are used in both types of the 1.75 mm V6 hotends, the 3.0 mm Bowden V6 hotend, and the Cyclops/Chimera/Kraken hotends. However there are plenty of other applications ready to be discovered! Item Specifics 1 - Brass Coupling Ring 1 - 2.85 mm Red Collet Clip 1 - 2.85 mm Collet
E3D ToolChanger Dock + Fixings Kit
Key Features: Genuine E3D ToolChange Dock & Fixing kit Replace a damaged dock with genuine parts Comes with the necessary fixing kitA replacement E3D ToolChanger tool dock for stowing idle tools with an included fixing kit enabling you to replace a damaged dock or add the E3D docking standard to your own tool changing printer.Item Specifics1 - Dock1 - Dock fixings kit
E3D Plated Copper V6 Nozzle - 1.75mm x 0.35mm
Key Features: Designed for use in E3D V6 Hotend Rated up to 500degC Engineered for ultimate high temperature performance Copper Plated; an optimal material for situations where temperatures are too hot for a silicone sock. Made from a special high-temperature copper alloy with a softening point of well above 500°C, and with much-increased thermal conductivity, these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these nozzles have an advanced nickel-based plating, considerably reducing the adhesion of plastic to the nozzle. & nbsp; Copper has more than 3x the thermal conductivity of brass, and the copper alloy used by E3D has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can & #39; t handle. Item Specifics Nozzle Diameter: 0.35 mm Filament Size: 1.75 mm Material: Nickle Plated Copper Alloy
