Arduino Pro Mini 328 - 5V/16MHz
Description: It’s blue! It’s thin (0.8mm)! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.Dimensions: 0.7×1.3″ (18x33mm)Features:ATmega328 running at 16MHz with external resonator (0.5% tolerance)USB connection off boardSupports auto-reset5V regulatorMax 150mA outputOver current protectedWeighs less than 2 grams!Reverse polarity protected
Arduino Stackable Header Kit
Description: These headers are made to work with the Arduino Main Board, Arduino Pro, and the Arduino Mega. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin and 2 6-pin), enough to connect a shield to an Arduino Main Board. These are the same headers we use in our tutorials and with our own shields.Includes:2x – 8-pin Arduino Stackable Headers2x – 6-pin Arduino Stackable Headers
HotPot Rotary Potentiometer
Description: When you need to track movement in a volatile environment, HotPot provides a thin and sealed form-factor with operating temperature tolerances of -40 to +85C. The HotPot is the preferred product for industrial and outdoor applications. By pressing down on various parts of the rotary dial, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the rotary. Can be used as an accurate positional indicator for rotational items, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.The HotPots are ideal for higher temperature environments, but many users also find that the HotPots which are made out of a impregnated fiberglass material, ‘feel’ better than the SoftPots which are made out of a polyester base. If you’re planning on using these pots with finger contact (versus with the actuator), you may want to consider using the HotPot line.Unit comes with adhesive backing. Connector is 0.1" spaced and bread board friendly.Note: These potentiometers work great with a finger, or stylus. For premium repeatability, the wiper listed below is perfect for machine and object positioning.Specifications:Diameter : 46mm (1.811")Resistance: 10 kOhmResistance Tolerance: 20%Linear Tolerance: 3%Temp Range: -40C to +85C standard
Arduino Uno- R3 SMD
Description: This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).Features:ATmega328 microcontroller Input voltage – 7-12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed
Concave Button - Black
Description: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: max 3A @ 120 VACMicroswitch reliability tested to 10,000,000 cyclesIncludes 3 terminal microswitchNet weight: 25gDimensions:Cap diameter: 35mmOverall height: 65mmMounting hole: 1 1/8th inch paddle bit (1.125" / 28mm)
Concave Button - Red
Concave Button - Red
Ultrasonic Range Finder - Maxbotix LV-EZ1
Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!Maxbotix is offering the EZ0, EZ1, EZ2, EZ3, and EZ4 with progressively narrower beam angles allowing the sensor to match the application. Control up to 10 sensors with only two pins! Checkout the Maxbotix FAQ listed below.Features:42kHz Ultrasonic sensorOperates from 2.5-5.5VLow 2mA supply current20Hz reading rateRS232 Serial Output – 9600bpsAnalog Output – 10mV/inchPWM Output – 147uS/inchSmall, light weight module
Ultrasonic Range Finder - Maxbotix LV-EZ3
Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!Maxbotix is offering the EZ0, EZ1, EZ2, EZ3, and EZ4 with progressively narrower beam angles allowing the sensor to match the application. Control up to 10 sensors with only two pins! Checkout the Maxbotix EZ1 FAQ listed below.Features:42kHz Ultrasonic sensorOperates from 2.5-5.5VLow 2mA supply current20Hz reading rateRS232 Serial Output – 9600bpsAnalog Output – 10mV/inchPWM Output – 147uS/inchSmall, light weight module
Big Dome Push Button - Green
Description: It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring.Features:LED indicator light runs at 12VDCBulb holder is easy to install or remove3 Terminals Button Actuator microswitch includedMicroswitch reliability tested to 10,000,000 cyclesMicroswitch can be replacedPolycarbonate lens cap for optical clarityDimensions:60 mm Diameter x 72 mm HeightNet weight: 100gramsMounting hole diameter: 24 mm
Big Dome Push Button - Blue
Description: More or less what the description says: this is a Big Blue Button! Whether your designs are malevolent or benign, from your doomsday machine to a particularly festive kitchen light switch, our Big Blue Button will help make your project Go. Features: LED indicator light runs at 12VDC Bulb holder is easy to install or remove 3 Terminals Button Actuator microswitch included Microswitch reliability tested to 10, 000, 000 cycles Microswitch can be replaced Polycarbonate lens cap for optical clarity Dimensions: 60 mm Diameter x 72 mm Height Net weight: 100grams Mounting hole diameter: 24 mm
xbee explorer usb
This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The highlight of this board is an FT231X USB-to-Serial converter. That's what translates data between your computer and the XBee. There's also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that'll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator. This board also breaks out each of the XBee's I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee's extended functionality, you can solder some header pins into those, or even just solder some wire. Note: There is no XBee included with this Explorer USB.UPC NO:852669008299 SKU:ADIB00M760ISO
XBee 2mW Wire Antenna - Series 2C (ZigBee Mesh)
Brand: Karlsson Robotics Features: New Version - Series 2 C Does not require constant firmware changes if a different mode/function is required Binding: Electronics Publisher: Digi International Inc. Details: This is the XBee XB24CZ7WIT-004 module from Digi. This is the updated version of the Series 2 (XB24-Z7WIT-004) module. It has an updated firmware which can be configured as router/endpoint/etc. without having to load a different firmware every time. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers computers systems really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2 but have updated firmware. They fully compatible with the Series 2 modules. Package Dimensions: 1.7 x 1.2 x 0.4 inches
Ultrasonic Range Finder - Maxbotix LV-EZ2
Description: This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!Maxbotix is offering the EZ0, EZ1, EZ2, EZ3, and EZ4 with progressively narrower beam angles allowing the sensor to match the application. Control up to 10 sensors with only two pins! Checkout the Maxbotix FAQ listed below.Features:42kHz Ultrasonic sensorOperates from 2.5-5.5VLow 2mA supply current20Hz reading rateRS232 Serial Output – 9600bpsAnalog Output – 10mV/inchPWM Output – 147uS/inchSmall, light weight module
