Buy Kreg Products online in United States

The Kreg K5 Pocket-Hole Jig has many advanced features that make building with wood easy. If you are looking for the best pocket hole jig to add to your collection of Kreg tools, look no further than the Kreg K5. Advanced Features for Building with Wood The Kreg Jig K5 incorporates the best Kreg Jig features of previous pocket hole jigs, with innovative upgrades you've never seen. That starts with a clamping mechanism that you can quickly adjust, without tools or adjusting nuts, to match your workpiece thickness. Just slide the clamp into place, "click" the large front-mounted clamp handle, and your jig is set to hold your workpiece tight every time. You'll find large support wings to hold your workpiece steady - plus, they open up to provide handy storage for bits and accessories. Add in a batch of other great features, like a swiveling dust collection port, spring-loaded stop for the drill guide block, and, of course, the ability to remove the guide block for portable use, and you have - quite simply - the most advanced Kreg Jig yet. Fast, Simple Setup When you're ready to get started building, the Kreg K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill guide block, and then set the workpiece clamp. Easy Thickness Adjustment The Kreg Jig offers Kreg's simplest workpiece clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two "clicks," and that's it. Now your clamp is set until you change to a different material thickness. Support with Built-In Storage Two large support wings can be attached quickly and easily to both sides of the K5 base. This way, long workpieces get solid support and won't tip. Plus, there's a large storage compartment under the lid in each wing where you can keep your Kreg drill bits, screws, and accessories close at hand, but out of the way. Swiveling Dust Collection Port The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. This keeps your work area free of chips and debris, makes drilling easier, and prolongs drill bit life by reducing heat.

Kreg Jig K5 with Starter Screw Kit and 2" Clamp

$ 160.62 ~~$ 163.90~~ 2% Off

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups. The Precision Router Lift allows precise above-the-table setup changes for table-mounted routers. The above-table collet access allows for fast and easy above-table bit changes. Precise Control The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3/8" x 9 1/4" x 11 3/4" plate fits all Kreg router tables plus many popular brands), with a hard-anodized aluminum plate that won't sag and resists scratches. It also accepts 20+ popular router models—without the need for adapters or modifications—in a high-performance carriage that you raise and lower from above the table. Easy Adjustments With the Lift, there’s no more reaching under the table to make adjustments or change bits. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The Lift also simplifies changing bits by allowing you to do that from above the table. Exact Bit Height The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1/16", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts. Perfect Routing Accessory Whether you’re upgrading an existing router table, setting up a new one, or building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.

Kreg Precision Router Lift (PRS5000) for Table-Mounted Routers

$ 322.32 ~~$ 328.90~~ 2% Off

Kreg K5MS K5 Master System With Screw Kit

$ 202.72 ~~$ 208.99~~ 3% Off

Three easy-to-use Jigs plus two bonus Clamps in one specially-priced kit. With this hardware installation kit you can install knobs and pulls, concealed hinges, and drawer slides with accurate, repeatable results. Kreg Concealed Hinge Jig The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly. Kreg Cabinet Hardware Jig The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new construction and for refreshing entire rooms. Whether you're updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps —? and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you'll know that every piece of hardware is positioned correctly and consistently. Kreg Drawer Slide Jig The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time. The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. The jig is simple to use, and it ensures that every drawer fits right and operates smoothly. Kreg Classic 2-Inch Face Clamp Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the show side of the joint.

Kreg Hardware Installation Kit with Jigs and Two 2-Inch Face Clamps

$ 169.53 ~~$ 171.24~~ 1% Off

Kreg SDK-C2SS-700 Stainless Steel Deck Screw - 2 in., #8 Coarse, Pan Head, (700 Pcs)

$ 172.47 ~~$ 175.99~~ 2% Off

Kreg PRS3020 True-FLEX Featherboard - Twin Pack

$ 87.11 ~~$ 87.99~~ 1% Off

Dimensions (Overall): 12.25 inches (L), 5.0 inches (H) x 10.5 inches (W)Weight: 7.08 poundsMaterial: PlasticBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 3 in. Wood Project Clamp & bull; Portable Base & bull; 3 Downloadable Project Plans & bull; Kreg Jig K5 Base with Ratcheting Front-Side Clamp & bull; Extension WingsMake your Kreg Jig K5 even better by upgrading to a Master System-The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include a 3 in. Wood Project Clamp with Automaxx auto-adjust technology, a Portable Base for building on the go, and downloadable plans for six great projects. The new 3 in. Wood Project Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp workpieces of varying thicknesses without ever having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece clamp on the Kreg Jig K5. Adding the Portable Base gives you yet another use for your Kreg Jig K5—simplified setup for portable building and making repairs. Plus, the Kreg Jig K5 Master System includes step-by-step downloadable plans for six great home projects so that you can get started building right away. The Most-Advanced Kreg Jig Yet, Plus Premium Kreg Accessories Front-mounted handle makes clamping easy Ratcheting clamp mechanism adjusts without tools Storage wings provide built-in storage for bits and accessories Swiveling dust collection port accepts any standard vacuum hose Adjustable workpiece stop mounts on either side for easy repeat drilling Stop-collar setting block makes drill bit setup easy Quick-release pin holds drill block securely in place Comes with Kreg Jig K5, 3 in. Wood Project Clamp, Portable Base for building on the go, and 6 downloadable plans.

Kreg K5MS Jig K5 Master System

$ 261.24 ~~$ 274.99~~ 5% Off

Dimensions (Overall): 8.3 inches (L), 8.3 inches (H) x 8.0 inches (W)Weight: .75 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; (1) Jig Base with Index Cams & bull; (1) Drill Guide & bull; (1) 35mm Carbide-Tipped Drill Bit & bull; (1) Stop Collar with Hex Wrench & bull; Owner’s ManualThe Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. Make cabinet door installation easy! Get drill press accuracy with any hand drill. Accurate hinge positioning with built-in indexing tabs Repeatable results with built-in measuring scales Reliable drilling with bit guide and stop collar Simple to use with any drill—no special tools needed Adjustable cams ensure proper hinge offset Durable carbide-tipped drill bit included Strong, lightweight materials for easy handling.