Buy Trick Drums Products online in United States

Sort by
Trick Drums Trick Drums Pro1-V BigFoot Low Mass Direct Drive Double Bass Drum Pedal
Dimensions (Overall): 16.0 inches (L), 8.75 inches (H) x 14.4 inches (W) x 16.0 inches (D)Weight: 14.18 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, With a new low-mass footboard, the lightning-fast Trick Drums Pro1-V Bigfoot double bass drum pedal just got faster. The Pro1-V Bigfoot base plate is machined from solid billet aluminum. This provides the Pro1-V Bigfoot pedal with an ultra-sturdy platform, on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI. The Slide-Trac Rapid Release Hoop Clamp streamlines setup time. To connect the Pro1-V Bigfoot to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release. No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V Bigfoot pedal, and hit the road. The Slide-Trac has three memory set-screws so can preset hoop size and distance from the head for fast setup and teardown, time after time. It also allows the Pro1-V Bigfoot to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Trick Drums Pro1-V BigFoot Low Mass Direct Drive Double Bass Drum Pedal
Trick Drums Dead Blow Bass Drum Beater
Dimensions (Overall): 8.75 inches (L), 1.5 inches (H) x 4.0 inches (W) x 8.75 inches (D)Weight: .23 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Solid Milled aluminum head & bull; Proprietary aggregate-reinforced impact & bull; Fatigue-proof steel shaft & bull; Overall weight: 3.5 ozDesigned for maximum impact, the Trick Dead Blow Beater applies precision technology to drum hardware. The Dead Blow's hollow head is made of solid milled aluminum and partially filled with a proprietary blend of material. Rigorous testing and development culminated in a material whose motion aids in impact as well as balance and rebound. While silently acting within the beater, the motion of the filler material drives the beater more firmly into the drum head.
Trick Drums
Trick Drums Dead Blow Bass Drum Beater
Trick Drums Dominator Double Bass Drum Pedal
Dimensions (Overall): 15.7 inches (L), 8.3 inches (H) x 14.3 inches (W) x 15.7 inches (D)Weight: 12.95 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Don't let the lower price fool . The Dominator Pedals share many of the same features as the Pro1-V pedals, including One-Handed Compression Spring Adjustment and Fully Independent Split Cams for quick and easy beater and board angle adjustments. Additionally, these pedals support the SB1 Laser Trigger System, the most accurate pedal triggers on the market. Direct Drive, coupled with aerospace tolerances, give all the control and power could ever need. Battle tested for years of use on the road in harsh touring environments.
Trick Drums
Trick Drums Dominator Double Bass Drum Pedal
Trick Drums Big Foot Single Drum Pedal
Dimensions (Overall): 14.88 inches (L), 5.88 inches (H) x 8.75 inches (W) x 14.88 inches (D)Weight: 6.1 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Trick Big Foot Drum Pedal is an engineering marvel. It features innovative design elements, aerospace materials--titanium, billet aluminum, stainless and hardened steel--and is machined on the latest state-of-the art CNC equipment. These technical innovations result in one thing: A drum pedal that plays like no other. The Big Foot model single pedal has all of the same features as the original Pro 1-V Detonator, though it comes with a long board footboard. Instead of the traditional footboard heel block design, the Big Foot uses a one-piece footboard that pivots at the far end of the board. Compression Spring Technology - The Big Foot Drum Pedal utilizes an internally housed compression spring. Compression springs have the ability to "cycle" faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension buildup as the beater approaches the drumhead; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing - simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove bass drum pedal from the hoop to change tension settings. Independent Split-Cam System - Because of the split-cam system's design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split-cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro 1-V Detonator into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment Cluster - This three position cluster is an integral part of the sophisticated geometry at work on the Pro 1-V Detonator. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending. Beaters - Universally adjustable, the Pro 1-V Detonator Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/soft surface change-out options are also included with beaters. Footboard - The Pro 1-V Detonator footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 lb. per square inch. The footboard is attached to the heel plate using a pressed-fit hardened solid steel pin which is extremely reliable and durable. Base Plate - The base plate is machined from solid billet aluminum. This provides the Pro 1-V Detonator with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI. Slide-Trac Rapid Release Hoop Clamp - This multi-purpose feature streamlines set-up time. To connect the Big Foot pedal to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V Detonator pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro 1-V Detonator to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness. This is truly a pedal like no other. Experience the difference. Try one for self today.
Trick Drums
Trick Drums Big Foot Single Drum Pedal
Trick Drums Buddy Rich 100th Anniversary Snare Drum 14 x 5.5 in.
Dimensions (Overall): 17.5 inches (L), 11.0 inches (H) x 17.5 inches (W)Weight: 12.95 poundsDrum Shell Material: MetalPrimary use: ConcertWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Limited edition drum, numbered and signed by Cathy Rich (Buddy’s daughter) & bull; Trick 3mm one ply aluminum shell & bull; Laser engraved GS007 throw off & bull; CNC machined BR badge & bull; Blue-tinted white marine pearl finishBuddy Rich 100th Anniversary Snare Drum. This limited edition drum is manufactured by Trick Drums in conjunction with Cathy Rich. Each drum is numbered and signed by Cathy Rich (Buddy’s daughter). Each drum features a Trick 3 mm one ply aluminum shell, laser engraved GS007 throw off, CNC machined BR badge, beavertail style lugs and a blue tinted white marine pearl finish. This is a workhorse drum not just a collectors item, it’s designed to be played and enjoyed.
Trick Drums
Trick Drums Buddy Rich 100th Anniversary Snare Drum 14 x 5.5 in.
Trick Drums Pro1-V BigFoot Direct Drive Double Bass Drum Pedal
Dimensions (Overall): 15.9 inches (L), 8.5 inches (H) x 14.3 inches (W) x 15.9 inches (D)Weight: 15.95 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Trick Pro1-V BigFoot Direct Drive Double Bass Drum Pedal is an engineering marvel. It features innovative design elements, aerospace materials - titanium, billet aluminum, stainless and hardened steel - and machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: A pedal that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to ""cycle"" faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe BigFoot's 13" footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The footboard is attached to the heel plate using a pressed-fit hardened solid steel pin which is extremely reliable and durable. Drive ShaftAll Trick Double Pedals feature the P1V6 Drive Shaft, which offers zero latency and zero backlash. This means that any and all motion that takes place on the secondary pedal is translated directly to the primary pedal. The P1V6 Drive Shaft is so reliable and effective that is has become a popular retrofit upgrade for non-Trick Pedals.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Pro1-V BigFoot Direct Drive Double Bass Drum Pedal
Trick Drums Pro1-V Black Widow ShortBoard Double Bass Drum Pedal
Dimensions (Overall): 15.75 inches (L), 8.5 inches (H) x 14.5 inches (W) x 15.75 inches (D)Weight: 15.64 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Compression Spring Technology & bull; Independent Split-Cam system & bull; Multi-position stroke adjustment cluster & bull; Universally adjustable beaters & bull; Solid billet aluminum footboardThe Trick Pro1-V Black Widow ShortBoard Direct Drive Double Bass Drum Pedal is a feat of bass pedal engineering. It features innovative design elements and aerospace materials: titanium, billet aluminum, stainless and hardened steel. Plus, it's machined on the latest state-of-the-art, precision CNC equipment. All of these innovations and features result in one thing: A pedal that feels totally customizable and comfortable that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to cycle faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch.Drive ShaftAll Trick Double Pedals feature the P1V6 Drive Shaft, which offers zero latency and zero backlash. This means that any and all motion that takes place on the secondary pedal is translated directly to the primary pedal. The P1V6 Drive Shaft is so reliable and effective that is has become a popular retrofit upgrade for non-Trick Pedals.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.Black Widow FinishNow pedals can look as awesome as they feel! Red and Black anodized parts with special graphics give the Pro1-V some extra attitude.
Trick Drums
Trick Drums Pro1-V Black Widow ShortBoard Double Bass Drum Pedal
Trick Drums Pro1-V ShortBoard Direct Drive Double Bass Drum Pedal
Dimensions (Overall): 16.4 inches (L), 6.5 inches (H) x 16.25 inches (W) x 16.4 inches (D)Weight: 15.35 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Trick Pro1-V BigFoot Direct Drive Double Bass Drum Pedal is an engineering marvel. It features innovative design elements, aerospace materials - titanium, billet aluminum, stainless and hardened steel - and machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: A pedal that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to "cycle" faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The footboard is attached to the heel plate using a pressed-fit hardened solid steel pin which is extremely reliable and durable. Drive ShaftAll Trick Double Pedals feature the P1V6 Drive Shaft, which offers zero latency and zero backlash. This means that any and all motion that takes place on the secondary pedal is translated directly to the primary pedal. The P1V6 Drive Shaft is so reliable and effective that is has become a popular retrofit upgrade for non-Trick Pedals.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Pro1-V ShortBoard Direct Drive Double Bass Drum Pedal
Trick Drums Pro1-V ShortBoard Direct Drive Single Bass Drum Pedal
Dimensions (Overall): 15.1 inches (L), 5.8 inches (H) x 8.8 inches (W) x 15.1 inches (D)Weight: 5.95 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Trick Pro1-V ShortBoard Single Bass Drum Pedal is an engineering marvel. It features innovative design elements, aerospace materials - titanium, billet aluminum, stainless and hardened steel - and machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: A pedal that plays like no other. Compression Spring Technology The Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to "cycle" faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings.  Independent Split-Cam System Because of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal.  Multi-Position Stroke Adjustment Cluster This three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending. Beaters Universally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters. Footboard The Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The footboard is attached to the heel plate using a pressed-fit hardened solid steel pin which is extremely reliable and durable.  Base Plate The Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI. Slide-Trac Rapid Release Hoop Clamp This multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.  This is truly a pedal like no other. Experience the difference. Try one for self today.
Trick Drums
Trick Drums Pro1-V ShortBoard Direct Drive Single Bass Drum Pedal
Trick Drums Pro1-V Black Widow BigFoot Single Bass Drum Pedal
Dimensions (Overall): 15.0 inches (L), 5.7 inches (H) x 8.75 inches (W) x 15.0 inches (D)Weight: 6.1 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Compression Spring Technology & bull; Independent Split-Cam system & bull; Multi-position stroke adjustment cluster & bull; Universally adjustable beaters & bull; BigFoot footboard constructed from solid billet aluminumThe Trick Pro1-V Black Widow BigFoot Direct Drive Bass Drum Pedal is an engineering marvel. It features innovative design elements and aerospace materials: titanium, billet aluminum, stainless and hardened steel. Plus, it's machined on the latest state-of-the-art, precision CNC equipment. These technical innovations result in one thing: A pedal that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to cycle faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe BigFoot's 13" footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.Black Widow FinishNow pedals can look as awesome as they feel! Red and Black anodized parts with special graphics give the Pro1-V some extra attitude.
Trick Drums
Trick Drums Pro1-V Black Widow BigFoot Single Bass Drum Pedal
Trick Drums Pro1-V ShortBoard Chain Drive Single Bass Drum Pedal
Dimensions (Overall): 15.0 inches (L), 5.5 inches (H) x 9.0 inches (W) x 15.0 inches (D)Weight: 6.2 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; All machined parts - NO DIE CAST - for superior quality and toughness & bull; Precision aerospace grade bearings & bull; Hand assembled and inspected & bull; Split-Cam design to allow adjustment of beater and pedal angles independently & bull; Slide-Trac hoop clamp adjustment providing variable distance for the pedal from the kick drumThe Trick Pro1-V ShortBoard Single Bass Drum Pedal is an engineering marvel. It features innovative design elements, aerospace materials - titanium, billet aluminum, stainless and hardened steel - and machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: A pedal that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to "cycle" faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Chain DriveThe Pro1-V Chain Drive Pedals utilize a large, single chain. This keeps the feel of the pedal light while increasing durability. And, for those players who need added versatility, a Direct Drive Conversion Kit is also available, allowing the pedal to become Direct Drive within seconds.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The footboard is attached to the heel plate using a pressed-fit hardened solid steel pin which is extremely reliable and durable. Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness. This is truly a pedal like no other. Experience the difference. Try one for self today.
Trick Drums
Trick Drums Pro1-V ShortBoard Chain Drive Single Bass Drum Pedal
Trick Drums Pro1-V Black Widow ShortBoard Single Bass Drum Pedal
Dimensions (Overall): 15.0 inches (L), 5.6 inches (H) x 8.75 inches (W) x 15.0 inches (D)Weight: 6.41 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Compression Spring Technology & bull; Independent Split-Cam system & bull; Multi-position stroke adjustment cluster & bull; Universally adjustable beaters & bull; Solid billet aluminum footboardThe Trick Pro1-V Black Widow ShortBoard Direct Drive Bass Drum Pedal is a feat of bass pedal engineering. It features innovative design elements and aerospace materials: titanium, billet aluminum, stainless and hardened steel. Plus, it's machined on the latest state-of-the-art, precision CNC equipment. All of these innovations and features result in one thing: A pedal that feels totally customizable and comfortable, and plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to cycle faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.Black Widow FinishNow pedals can look as awesome as they feel! Red and Black anodized parts with special graphics give the Pro1-V some extra attitude.
Trick Drums
Trick Drums Pro1-V Black Widow ShortBoard Single Bass Drum Pedal
Trick Drums Pro 1 V Bigfoot Chain Drive Single Bass Drum Pedal
Dimensions (Overall): 15.2 inches (L), 5.75 inches (H) x 9.0 inches (W) x 15.2 inches (D)Weight: 6.52 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; All machined parts - NO DIE CAST - for superior quality and toughness & bull; Precision aerospace grade bearings & bull; Hand assembled and inspected & bull; Split-Cam design to allow adjustment of beater and pedal angles independently & bull; Slide-Trac hoop clamp adjustment providing variable distance for the pedal from the kick drumThe Pro 1-V Bigfoot by Trick Drums is almost identical to the Pro 1-V short board with the exception of the 13-inch footboard. The longer footboard and lack of a heel block suits any style and is quickly becoming one of the fastest growing trends in kick pedals. The long footboard changes the pivot point of the kick pedal and gives the player more foot room. It is rumored that this type of design caters better to certain styles such as heel-toe. The pedal is constructed with all machined parts and aerospace-grade bearings for superior quality and durability. Each pedal is hand-assembled and inspected. The Pro 1-V Bigfoot also has a host of features designed with the drummer in mind and most of which are protected by US patents. The innovations include a split-cam for independent pedal/beater adjustments, a height-adjustment cluster to adjust the stroke speed of the pedal and much more. The last, but certainly not least, notable feature of the Trick pedals is the ZERO latency ZERO backlash drive shaft. This drive shaft, for the double pedals, operates on 8 bearings and is the cleanest and fastest in the world. This takes the pedal to a whole new level.
Trick Drums
Trick Drums Pro 1 V Bigfoot Chain Drive Single Bass Drum Pedal
Trick Drums Pro 1 V Short Board Chain Drive Double Bass Drum Pedal
Dimensions (Overall): 16.0 inches (L), 8.0 inches (H) x 14.0 inches (W) x 16.0 inches (D)Weight: 15.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; All machined parts - NO DIE CAST - for superior quality and toughness & bull; Precision aerospace grade bearings & bull; Hand assembled and inspected & bull; Split-Cam design to allow adjustment of beater and pedal angles independently & bull; Slide-Trac hoop clamp adjustment providing variable distance for the pedal from the kick drumThe Pro 1-V was the first pedal produced by Trick Drums and has been the baseline for all of the other products since. Precision machine work combined with solid engineering has produced the smoothest, quietest, and most sought after pedal on the market. This pedal has features 10-inch footboards similar to many other pedals on the market, but what sets it apart is that the double pedal can be split to become two single pedals. Designed with the drummer in mind, most of the features of the Pro 1-V are protected by US patents. The innovations include a split-cam for independent pedal/beater adjustments, a height-adjustment cluster to adjust the stroke speed of the pedal and much more. The last, but certainly not least, notable feature of the Trick pedals is the ZERO latency ZERO backlash drive shaft. This drive shaft, for the double pedals, operates on 8 bearings and is the cleanest and fastest in the world. This takes the pedal to a whole new level.
Trick Drums
Trick Drums Pro 1 V Short Board Chain Drive Double Bass Drum Pedal
Trick Drums Pro1-V ShortBoard Low Mass Chain Drive Single Bass Drum Pedal
Dimensions (Overall): 16.0 inches (L), 14.0 inches (H) x 16.0 inches (W) x 16.0 inches (D)Weight: 14.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, With a new low-mass footboard, the lightning-fast Trick Drums Pro1-V single bass drum pedal just got faster. It features innovative design elements, aerospace materials — titanium, billet aluminum, stainless and hardened steel — and is machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: a pedal that plays like no other. The Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to cycle faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing — simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings.  Because of the split-cam system's design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal.  Universally adjustable, the Pro1-V Bass Drum Beaters can be moved easily to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters. The Pro1-V footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The underside of the Low Mass Footboards are then weight-relieved, milling out seven ounces of aluminum. This gives an overall lighter feel when compared to the standard Pro1-V. The Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra-sturdy platform, on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI. The Slide-Trac Rapid Release Hoop Clamp streamlines setup time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release. No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road. The Slide-Trac has three memory set-screws so can preset hoop size and distance from the head for fast setup and teardown, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Pro1-V ShortBoard Low Mass Chain Drive Single Bass Drum Pedal
Trick Drums Pro1-V ShortBoard Low Mass Chain Drive Double Bass Drum Pedal
Dimensions (Overall): 16.0 inches (L), 8.0 inches (H) x 14.0 inches (W) x 16.0 inches (D)Weight: 16.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, With a new low-mass footboard, the lightning-fast Trick Drums Pro1-V double bass drum pedal just got faster. The Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra-sturdy platform, on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI. The Slide-Trac Rapid Release Hoop Clamp streamlines setup time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release. No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road. The Slide-Trac has three memory set-screws so can preset hoop size and distance from the head for fast setup and teardown, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Pro1-V ShortBoard Low Mass Chain Drive Double Bass Drum Pedal
Trick Drums Pro1-V BigFoot Low Mass Direct Drive Single Bass Drum Pedal
Dimensions (Overall): 17.25 inches (L), 9.25 inches (H) x 9.5 inches (W) x 17.25 inches (D)Weight: 6.81 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, With A New Low Mass Footboard, The Lightning Fast Pro1-V Just Got Faster!The Trick Pro1-V BigFoot Low Mass Direct Drive Bass Drum Pedal features innovative design elements, aerospace materials - titanium, billet aluminum, stainless and hardened steel - and is machined on the latest state-of-the-art CNC equipment. These technical innovations result in one thing: A pedal that plays like no other.Compression Spring TechnologyThe Pro1-V utilizes an internally housed compression spring. Compression springs have the ability to cycle faster and utilize energy more efficiently. The benefit is a pedal that will react as fast as foot. The compression spring works with the profiled cam follower to reduce the amount of spring tension build-up as the beater approaches the drum head; this gives a more fluid stroke from beginning to end. Spring tension is adjustable while 're playing-simply turn the spring dial that's conveniently located within easy reach at the top of the main housing. Imagine no longer having to remove pedal from the hoop to change tension settings. Independent Split-Cam SystemBecause of the split-cam systems design, can now change the attitude and attack of the pedal in seconds. Trick's fully independent split cam system allows the player to infinitely and independently adjust the beater from the drive cam angle with a 360-degree range of smooth yet solid settings. This system also allows for immediate conversion of the Pro1-V into a cocktail kit pedal or a triggering pedal. Multi-Position Stroke Adjustment ClusterThis three position cluster is an integral part of the sophisticated geometry at work on the Pro1-V. It gives the player separate adjustments for the footboard angle, pedal action, and throw. This feature is patent pending.BeatersUniversally adjustable, the Pro1-V Bass Drum Beaters can be easily moved to any height/angle along the titanium shafts within seconds by using a standard size drum key. This allows the beater to strike desired location on any sized bass drum without radically affecting the overall pedal feel. Hard/Soft surface change-out options are also included with beaters.FootboardThe BigFoot's 13" footboard is machined from solid billet aluminum that is rigorously fracture tested to 12,000 pounds per square inch. The underside of the Low Mass Footboards are then weight-relieved, miling out 7 ounces of Aluminum. This gives an overall lighter feel when compared to the standard Pro1-V.Base PlateThe Pro1-V base plate is machined from solid billet aluminum. This provides the Pro1-V pedal with an ultra sturdy platform on which everything else is built. The base plate is tensile strength certified to withstand over 12,000 PSI.Slide-Trac Rapid Release Hoop ClampThis multi-purpose feature streamlines set-up time. To connect the Pro1-V to bass drum, simply hold down on the spring loaded lever and slide the pedal onto hoop and release! No more fumbling to screw and unscrew wing nuts. When it's time to pack up, simply squeeze down on the lever to disengage the clamp, remove Pro 1-V pedal, and hit the road! The Slide-Trac has three memory set-screws so can pre set hoop size and distance from the head for fast set up and tear down, time after time. It also allows the Pro1-V to fit snugly and perfectly on any brand of bass drum hoop regardless of the width or thickness.
Trick Drums
Trick Drums Pro1-V BigFoot Low Mass Direct Drive Single Bass Drum Pedal
Trick Drums Dominator Beater
Dimensions (Overall): 8.2 inches (L), 2.0 inches (H) x 2.0 inches (W) x 8.2 inches (D)Weight: .25 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Dominator pedal is Trick's all-machined bass drum beater with a telescoping beater head. The beater shaft is crafted from a unique metal called Fatigue Proof Steel, which allows the shaft to absorb the exact amount of flex necessary to keep it from breaking under repeated heavy impact. The Dominator beater is heavier than the Pro 1 V Beater and adds additional punch to those that require added mass.
Trick Drums
Trick Drums Dominator Beater
Trick Drums Cymbal Quick Release Silver
Dimensions (Overall): 7.0 inches (L), 1.0 inches (H) x 4.25 inches (W) x 7.0 inches (D)Weight: .12 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Trick Drums Quick Release Cymbal Topper is another Trick innovation, and is designed to sustain prolonged beating, touring, rains, sweat, blood, heavy metal, and just about anything else can throw at it! Installs in just seconds and lets swap, add, and remove cymbals in mere milliseconds!
Trick Drums
Trick Drums Cymbal Quick Release Silver
Trick Drums Pro1-V Hi Hat Stand
Dimensions (Overall): 30.0 inches (L), 8.0 inches (H) x 18.0 inches (W) x 30.0 inches (D)Weight: 15.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Lightweight aluminum construction & bull; Push-pull sprocket design & bull; Extended footboard & bull; Single-braced, two-legged baseThe Pro1-V Hi Hat Stand is unlike any other. It features our BigFoot long board as well as an open, forward design. Also unique to this stand is its removable leg system which gives traditional stand stability while allowing for quick and easy removal for use on double bass drum setups. 20 spring tension adjustment positions give all the flexibility need to dial in desired feel. It may appear a lightweight at 7 lbs legless (10 lbs with legs), but Trick’s legendary build quality ensures it will stand up to all that leg can throw at it.
Trick Drums
Trick Drums Pro1-V Hi Hat Stand
Trick Drums SB1 Laser Triggers For Double Dominator
Dimensions (Overall): 5.0 inches (L), .05 inches (H) x 3.25 inches (W) x 5.0 inches (D)Weight: 2.6 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Flawless sensory laser & bull; State-of-the-art circtuitry & bull; Featuring semi-transparent durable delrin face & bull; Brushed steel design & bull; Matte black powder-coated exteriorDouble or Dual Single Triggers for Dominator Pedals. Advanced laser technology is deployed to monitor motion and velocity. When the motion and velocity abruptly stop (the beater hitting the drum head or pad) on the forward stroke, a trigger signal is sent to the drum brain. Universal Power Supply is included. Only Fits Dominator Pedals. Pro1-V Item Numbers are P1VSB1-1 and P1VSB1-2.
Trick Drums
Trick Drums SB1 Laser Triggers For Double Dominator
Trick Drums SB1 Laser Trigger For Single Dominator
Dimensions (Overall): 12.0 inches (L), 4.0 inches (H) x 8.0 inches (W) x 12.0 inches (D)Weight: 4.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Flawless sensory laser & bull; State-of-the-art circtuitry & bull; Featuring semi-transparent durable delrin face & bull; Brushed steel design & bull; Matte black powder-coated exteriorSingle Trigger for Dominator Pedal. Advanced laser technology is deployed to monitor motion and velocity. When the motion and velocity abruptly stop (the beater hitting the drum head or pad) on the forward stroke, a trigger signal is sent to the drum brain. Universal Power Supply is included. Only Fits Dominator Pedals. Pro1-V Item Numbers are P1VSB1-1 and P1VSB1-2.
Trick Drums
Trick Drums SB1 Laser Trigger For Single Dominator
Trick Drums Pro 1 V Retrofit Chain Kit
Dimensions (Overall): 4.0 inches (L), 1.2 inches (H) x 2.6 inches (W) x 4.0 inches (D)Weight: .35 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, This PRO 1 V Retrofit Chain Kit can help turn a direct drive PRO 1 V or Bigfoot into a chain drive in less than one minute. The chain drive has a unique 3-point pin system which allows the user to change the position of the chain (thus the feel) simply by loosening a screw and moving the chain hub. The cam still functions like an existing direct drive models where by rotating the cam on the center axis the user can adjust the foot boards angle.
Trick Drums
Trick Drums Pro 1 V Retrofit Chain Kit
Trick Drums Cymbal Quick Release Silver 3 Pack
Dimensions (Overall): 4.2 inches (L), 2.2 inches (H) x 3.3 inches (W) x 4.2 inches (D)Weight: .35 poundsPackage Quantity: 3Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Cymbal Quick Release topper from Trick is based on proven technology and is one of the first to integrate such technology into a musical instrument application. Already used by some of the hardest hitters in the business, this topper has proven to protect cymbals and reduce break down and set up times. This two-pack contains two felt washers, two quick-release nuts and two height-adustable cymbal sleeves.
Trick Drums
Trick Drums Cymbal Quick Release Silver 3 Pack
Trick Drums Pro1-V Black Widow Hi-Hat Stand
Dimensions (Overall): 30.0 inches (L), 8.5 inches (H) x 12.25 inches (W) x 30.0 inches (D)Weight: 12.69 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; BigFoot long board & bull; Open, forward design & bull; Removable leg system & bull; 20 spring tension adjustment positions & bull; 7 lb. without legs, 10 lb. with legsThe Pro1-V Hi Hat Stand is unlike any other, and is now available as the Limited Edition Black Widow. It features Trick's BigFoot long board as well as an open, forward design. Also unique to this stand is its removable leg system which gives traditional stand stability while allowing for quick and easy removal for use on double bass drum setups. 20 spring tension adjustment positions give all the flexibility need to dial in desired feel.It may appear to not be up to the task as a 7 lb. legless hi-hat stand(10 lb. with legs), but Trick’s legendary build quality ensures it will stand up to all that leg can throw at it.
Trick Drums
Trick Drums Pro1-V Black Widow Hi-Hat Stand
Trick Drums Pro 1-V Detonator Double Pedal Conversion Kit
Dimensions (Overall): 16.0 inches (L), 8.0 inches (H) x 8.0 inches (W) x 16.0 inches (D)Weight: 7.0 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, With the Trick Pro 1-V Detonator's expandable design, drummers who have purchased a single pedal can convert it to a double pedal at any time by simply ordering the double pedal add-on kit. The add-on kit includes a second fully-functioning single pedal, drive shaft, beater hub assembly, and another beater. The drive shaft linkage is machined to exacting specifications resulting in a connection link that is tight, solid and secure. This link creates immediate response without any "slop" in play to the second pedal. The add-on installs onto the original single pedal in less then a minute with only a drum key. Think of the options. Use the Pro 1-V Detonator Pedal Conversion Kit to quickly add a blistering double bass pedal to set-up or remove the conversion drive shaft and have two fully-functioning single Pro 1-V Detonator pedals at command.
Trick Drums
Trick Drums Pro 1-V Detonator Double Pedal Conversion Kit
Trick Drums SB1 Laser Triggers For Double Pro1-V BigFoot & ShortBoard
Dimensions (Overall): 12.25 inches (L), 7.0 inches (H) x 8.25 inches (W) x 12.25 inches (D)Weight: 2.65 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Flawless sensory laser & bull; State-of-the-art circtuitry & bull; Featuring semi-transparent durable delrin face & bull; Brushed steel design & bull; Matte black powder-coated exteriorDouble or Dual Single Triggers for Pro1-V BigFoot & ShortBoard Pedals. Advanced laser technology is deployed to monitor motion and velocity. When the motion and velocity abruptly stop (the beater hitting the drum head or pad) on the forward stroke, a trigger signal is sent to the drum brain. Universal Power Supply is included. Only Fits Current Pro1-V Pedals. Dominator Item Numbers are DOMSB1-1 and DOMSB1-2.
Trick Drums
Trick Drums SB1 Laser Triggers For Double Pro1-V BigFoot & ShortBoard
Trick Drums SB1 Laser Trigger For Single Pro1-V BigFoot & ShortBoard
Dimensions (Overall): 12.2 inches (L), 6.5 inches (H) x 8.3 inches (W) x 12.2 inches (D)Weight: 1.86 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Flawless sensory laser & bull; State-of-the-art circtuitry & bull; Featuring semi-transparent durable delrin face & bull; Brushed steel design & bull; Matte black powder-coated exteriorSingle Trigger for Pro1-V / BigFoot Pedal. Advanced laser technology is deployed to monitor motion and velocity. When the motion and velocity abruptly stop (the beater hitting the drum head or pad) on the forward stroke, a trigger signal is sent to the drum brain. Universal Power Supply is included.Only Fits Current Pro1-V Pedals. Dominator Item Numbers are DOMSB1-1 and DOMSB1-2.
Trick Drums
Trick Drums SB1 Laser Trigger For Single Pro1-V BigFoot & ShortBoard
Trick Drums Snare Drum Cord
The Trick Drums replacement snare drum cord is essential gear for every drummer's trap case.
Trick Drums
Trick Drums Snare Drum Cord
trick drums floor tom to bass drum conversion kit 16 inches
Floor Tom to Bass Drum Conversion Kit for 16" Floor Toms with 8-lug Die-cast/Triple-flanged HoopsUPC NO:753382161813 SKU:ADIB007BPRH7Q
Trick Drums
trick drums floor tom to bass drum conversion kit  16 inches
Trick Drums Dominator Beater
Dominator pedal is Trick's all-machined bass drum beater with a telescoping beater head. The beater shaft is crafted from a unique metal called Fatigue Proof Steel, which allows the shaft to absorb the exact amount of flex necessary to keep it from breaking under repeated heavy impact. The Dominator beater is heavier than the Pro 1 V Beater and adds additional punch to those that require added mass.
Trick Drums
Trick Drums Dominator Beater
Trick Drums V6 Drive Shaft for DW Pedals
Traditionally the drive shaft has been the weak link in mass produced double pedal set-ups. No longer, the Trick 6.0 Drive Shaft (P1V6) is a free-floating drive shaft with zero backlash. The magic stems from a lightweight CNC precision machined components coupled with eight roller bearings. Trick's patented design assures the player that what his / her left foot plays will be directly transmitted to the main pedal with no delay or imprecision. The Trick 6.0 (P1V6) is the one piece of hardware you can purchase that will noticeably improve the performance and feel of your current double pedal. Fits DW pedals.
Trick Drums
Trick Drums V6 Drive Shaft for DW Pedals
Trick Drums Pro 1 V Retrofit Chain Kit
This PRO 1 V Retrofit Chain Kit can help turn a direct drive PRO 1 V or Bigfoot into a chain drive in less than one minute. The chain drive has a unique 3-point pin system which allows the user to change the position of the chain (thus the feel) simply by loosening a screw and moving the chain hub. The cam still functions like an existing direct drive models where by rotating the cam on the center axis the user can adjust the foot boards angle.
Trick Drums
Trick Drums Pro 1 V Retrofit Chain Kit
trick drums tp3 cymbal polish
Cymbal Polish, Four Ounce BottleUPC NO:753382000037 SKU:ADIB00502DHW6
Trick Drums
trick drums tp3 cymbal polish
trick drums dbb dead blow bass drum beater
Designed for maximum impact, the Trick Dead Blow Beater applies precision technology to drum hardware. The hollow head is made of solid milled aluminum and partially filled with a proprietary blend of material. Rigorous testing and development culminated in a material whose motion aids in impact as well as balance and rebound. While silently acting within the beater, the motion of the filler material drives the beater more firmly into the drum head. Affixed to a beater shaft made of Fatigue Proof Steel, most commonly used to make axel shafts for race cars. Overall weight: 3.5 ozUPC NO:753382556077 SKU:ADIB07PWGL32T
Trick Drums
trick drums dbb dead blow bass drum beater
Back to Top