Xantrex 808-0817-01 Remote Control for Freedom X and XC ( Pack of 2 )
Xantrex 808-0817-01 Remote With 25' Cable For Freedom X and XC Inverters
XANTREX XPOWER 1500 INVERTER GFCI & REMOTE ON/OFF UL458 813-1500-UL
Product Overview The 813-1500-UL is a 1-output XPower Inverter suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. Featuring high surge capability, it is ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. XPower inverters connect easily to 12V batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainment systems, power tools, office equipment and much more. Portable power Two GFCI AC receptacles for connecting multiple loads High surge capacity for products that require more power to start High efficiency - Converts virtually all the battery’s available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch included Overload and over temperature shutdown Over voltage protection (15VDC) Low voltage alarm (11VDC) Low voltage cut-out ( 10.5VDC ) Meets the stringent UL458 regulatory requirements Applications Power Management, Automotive, Consumer Electronics, Lighting, Computers & Computer Peripherals This listing is for Each DC Input Voltage < 12 V DC Input Voltage Range < 10-15 V AC Output Voltage < 115 V AC Output Voltage Range < 110-130 V Watts (Continuous) < 1500 W Watts (Intermittent) < 3000 W Frequency < 60 MHz Number of AC Outlets < 1 Item Width < 5.9 in Item Height < 3 in Overload Protection < Yes
Xantrex Solar PWM 30A Charge Controller
Xantrex PWM Charge Controller Model: 709-3024-01 Advanced multi-stage charging technology, Bulk, Absorption, Float, Equalization Battery types supported: Sealed (AGM), Gel, Flooded, Lithium Iron Phosphate (LiFePO4) Best-in-class PV array and battery protections Aesthetic flush-mount industrial design Designed to charge lithium ion batteries including LIFePO4, the 30 A PWM (Pulse Width Modulation) charge controller features a flush mount industrial design for a clean finish. The Xantrex Solar PWM Charge Controller 30 features a highly-efficient PWM charging mode, designed specifically for an aesthetically clean and integrated look in an RV, boat, and truck. Intuitive and easy-to-program to get your solar system harvesting energy as quickly as possible. Equipped with best-in-class PV array and battery protections and a built-in LCD display providing real-time system data. Optional accessories include a remote battery temperature sensor. BRAND: Xantrex Model NO: XAN709302401 Xantrex Solar PWM 30A Charge Controller
Xantrex 804-1260-02 TRUECharge2 12V 60A Parallel Stackable Battery Charger
Truecharge2 60A parallel stackable battery charger, Mfg# 804-1260-02, 60 amp, 12 VDC output, 120/240VAC 50/60Hz input, 3 bank, 2 year warranty.Features :GLM Part Number: 28020; Sierra Part Number: 18-2104; Mercury Part Number: 75832T; OMC Part Number: 915716; Volvo Part Number: 853255-8New100 Pack of 2 AWG Heavy-duty Lugs with a 3/8" Screw Size RingManufactured from 100% heavy-duty annealed tinned coppPackage Quantity : 1
Xantrex 100 Watt Solar Kit
XANTREX 100W SOLAR KIT100W Solar KitThe Xantrex Solar 100W kit features solar panels with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells.The Xantrex Solar 100W kit includes a 30A charge controller and system hardware that is designed for a fast easy installation, including PV cables battery cables with a built-in fuse and ring terminals, built-in ferrule terminations for quick connections to the charge controller and mounting brackets. Easily customize and extend your solar system using our expansion kits.Features:100W Output15% smaller and lighter*Best in class 18% module efficiency*PERC Technology**5 year product warranty5 busbar technology****Xantrex 100W rigid panel specs and performance compared with 100W models of other popular brands**competitor panels do not currently use PERC technology***Most brands use 2-4 busbars, more busbars means better efficiency durabilitySpecifications:Solar Panel - A 100W solar panel with 5 busbars and PERC (Passivated Emitter and Rear Contact) mono-crystalline cells, a special cell technology that increases module efficiency significantly over standard solar cells.Charge Controller -A 30A Pulse-Width Modulation (PWM) flush-mounted charge controller is provided to charge and protect your batteries. Featuring an LCD screen, multi-stage battery charging, charging protections, two USB ports and real-time system indicators.PV and Battery Cables -Weather resistant and certified cables are provided to connect the solar panel to the charge controller and from the charge controller to the battery. The PV cables and battery cables, with a built-in fuse and ring terminals, built-in ferrule terminations for quick connections to the charge controller.Mounting Hardware - Mounting brackets, cable clamps and tie wraps are included.
Xantrex C-Series Digital Remote W/50' Cable
C-Series Digital Remote with 50' CableMeter digital volt C-Series remote with 50' cableUsed with C35/40/60 Charge ControllersWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings. ca. gov. Product: XANTREX C-SERIES DIGITAL REMOTE WITH 50FT CABLE Manufacturer: Xantrex Manufacturer Part No: CM/R-50 Product: XANTREX C-SERIES DIGITAL REMOTE WITH 50FT CABLE
Xantrex C-Series Solar Charge Controller - 12 Amps
C-Series Solar Charge Controller - 12 AmpsPV charge lighting and load controllerThe C12 charge lighting or load controller is uniquely sophisticated. As a charge controller it features three-stage charging user definable voltage parameters and automatic equalization. Standard in the C12 & rsquo; s load control circuitry are field adjustable low voltage disconnect and reconnect points along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller. Lighting run time is adjustable from two to eight hours or can be set from dusk to dawn operation. It is used worldwide in a variety of applications including remote village lighting systems and automatic outdoor lighting. An optional battery temperature sensor manages battery charging based on battery temperature. Features: Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated chargingTwo-year standard warrantyPV charge and load controllerAutomatic lighting controllerElectronic detection of short-circuit overload over-temperature and reverse polarity conditionsTolerance to hostile environments with conformal-coated boards and powder-coated enclosureField adjustable voltage and battery set pointAutomatically disconnects from the battery at nightCompatible with negative ground and ungrounded systemsWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings. ca. gov. Product: XANTREX C-SERIES SOLAR CHARGE CONTROLLER 12 AMPS Manufacturer: Xantrex Manufacturer Part No: C12 Product: XANTREX C-SERIES SOLAR CHARGE CONTROLLER 12 AMPS
XANTREX 813-1500-UL Xantrex XPower 1500 Inverter GFCI and Remote ON/OFF UL458
XANTREX 813-1500-UL Xantrex XPower 1500 Inverter GFCI and Remote ON/OFF UL458MPN:813-1500-ULUPC:715535896478These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. All models meet the stringent UL458 regulatory requirements. Product Features: Portable power for AC products Two GFCI AC receptacles for connecting multiple loads High surge capacity for products that require more power to start High efficiency - converts virtually all the batterys available power to AC Mounting brackets for convenient installation Heavy duty stud connectors Remote on/off switch includedProtection Features: Overload and over temperature shutdown Over voltage protection (15.0 VDC) Low voltage alarm (11.0 VDC) Low voltage cut-out (10.5 VDC)Product Applications: Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans Handheld Power Tools: drills, jigsaws, sanders and buffers Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment Office Equipment: computers with 17" monitors, facsimile machines
