Features:
1. Screen and interface 2.2 inch LCM Screen, STN (yellow-green mode), display more content, large font, clear and not hurting eyes, 10 regular interfaces + 4 over-limit alarm interfaces 1 English display + 1 Chinese display (included in 10 regular display)
2. Test input interface Rich input interface to meet different input requirements 20A high current occlusion screw column, Type A USB, USB, Micro USB, Type-C, 5.5 * 2.1 mm male Connector Note that only high current occlusal screw posts support up to 10A input, other ports do not support 3. 3.7 -inch fan Integrated heat sink, ABS base, with self-locking screw, firm and durable Silent fan 22± 3dBA, bearing fan, continuous operation for more than 40, 000 hours Intelligent temperature control, automatic start and stop, automatic start at temperature over 40 °C 12*12mm light touch button Comfortable and light 100, 000 lifespan, one button, multiple controls, 270°± 5° large angle adjustable knob resistance, double knob combination, easy to adjust and sensitive, fast response M3 copper and copper columns, the module is solid and firm Double-layer design, simple and elegant appearance
4. Overrun protection Voltage, current, power over-limit automatic stop input, sound + interface double alarm prompt, protection module and tested power supply, to avoid damage Low voltage protection, over voltage protection, current over limit protection, power over limit protection Equipped with AC100V~240V to 12V power supply, Chinese and English manual, universal EVA lining, with easy-to-carry carton, sturdy and beautiful, cushioning and rolling
5. Application range General test of various power supplies, adapters, data lines, etc.
Specifications:
Power Voltage: DC 6~12V
Interface: DC 5.0V
Voltage measure range: 0~150V
Accuracy: 0.05V
Current adjustable range: 0~10A
Accuracy: 0.05A
Capacity range: 0~ 999.999A h
Accuracy: 0.001A h
Cumulative range: 0~ 99999.9W h
Accuracy: 0.01W h
Measure range: 0~ 2999.9W
Accuracy: 0.01W
Impedance range: 0~ 999.9 Ω
Accuracy: 0.01 Ω
Temperature range: 0~99?
Accuracy: 1?
Max timing:
999:59: 59
Accuracy: 1s
Fan cooling power: <150W
Fan control threshold:Temp> 40?
Standby reminder threshold: <2W/0.5h;
Timing function:> 0.5W start timing
Input interface: 20A high current occlusion screw column, type A USB, USB, Micro USB, Type-C
USB Refresh time: >500ms/time
Measurement rate: 0.5 time/s
Over limit alarm: interface warning and buzzer alarm Voltage overrun auto- stops discharge range: 0~150V Current overrun auto- stops discharge range: 0~10A Power overrun auto- stops discharge range: 0~150W
Display screen: LCM display
Size: 149× 96× 80mm/195× 105× 135mm
Consumption: <1.5A
Operating temp:-10~60?
Operating humidity:10~80
Mode Button Function Description:
1. Click to switch each display interface
2. The function of the button operation in the 2-4 interface is as follows: A. long press all records to clear; B. Double-click capacity (Ah) to reset to zero; C. three-stroke power (Wh) reset to zero; D.
four-stroke power ( 00:00: 00) reset to zero; E. consecutive seven hits at no load, making the current zero accurate in the current temperature environment. Calibration is zeroed for accurate measurement at low currents; Factory reset all parameters.
3. The operation functions of the buttons under the interfaces 6, 7, 9, 11, and
13 are as follows: A. Double-click the parameter value to increase, double-click and long press the parameter to continue to increase; B. The value of the three-stroke parameter is reduced, and the length of the three-stroke is continued to decrease.
How to Use:
1. Input voltage × current ≤ 150W;
2. Turn on the load p