Avenview HBT2-C6BPOC-SET HDMI HDBaseT CAT5/6/7 Extender (Transmitter/Receiver)Set with IR/RS-232/PoC

The Avenview HBT2-C6BPOC-SET HDMI HDBaseT CAT5/6/7 Extender SET is an upgraded unit from the HBT-C6BPOC-SET that can now extends high definition video, multi-channel digital audio, data formats IR/RS232 and POC up to 100m (330ft) to any HD Monitor at 1080p or true 4K@60 resolutions.

Video Signals: 4K2K@30 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/48-bit color depth. Audio signals: Uncompressed 7.1ch digital Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz and RS-232 over CAT5/6.

The HBT2-C6BPOC-SET includes two (2) units: Sending unit (TX) HBT-C6BPOC-S and Receiving unit (RX) HBT-C6BPOC-R with one (1) UTP output port which allows the user to extend video, audio and data signals up to 100m (330ft). The HBT2-C6BPOC-SET also allows bi- directional IR control and RS-232 connected to the TX unit, allowing the users to use any IR remote and third party RS-232 control at the monitor side . The HBT2-C6BPOC-SET offers the most convenient solution for extending an application over long distances with A/V transmission @10G.

Features

• Input: HDMI with 3D & 4Kx2K, 1080p,HDCP and DVI compliant.
• Extend the transmission: Full HD 1080p up to 100m (330ft) from the HDMI source 48-bit and 4K2K@60 up to 80m (264ft).
• Support PoC (Power over Cable) power either units from the TX or RX side with one power supply
• Supports HDCP & EDID Bypass.
• Supports CEC bypass.
• Audi Supported: 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.
• Support full frequency IR signal from 20KHz to 60KHz .
• Bi-directional IR pass-through.
• 3D support: Follow by Display / TV?s EDID.
• Full Duplex RS-232 control up to 115,200 bps.
• Wall mounting bracket included.

NOTICE:

1. All HDMI over CATx transmission distances are measured using Belden CAT6A (625MHz), 4-Pair,UTP-Unshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H spline, Ripcord, PVC Jacket using Quantum 980 signal HDMI Video Generator Module with Video Pattern Testing and shielded ends. 2. The transmission length is largely affected by the type of category cables, also the type of HDMI sources, and the type of HDMI display. The testing result shows solid UTP cables (usually in the form of 300m or 1000ft bulk cable) can transmit a lot longer signals than stranded UTP cables (usually in the form of patch cords). Shielded STP connectors are better suit than unshielded UTP connectors. A solid UTP CAT6A cable shows longer transmission length than solid UTP CAT5E/6E cable. 3. EIA/TIA-568-B termination (T568B) for category cables is recommended. 4. To reduce the interference among the unshielded twisted pairs of wires in category cable, you can useshielded STP cables with shielded connector to improve EMI problems, which occurs in poor wiring environments with unplanned cable runs situated away from EMI interference. 5. Because the quality of the category cables has the major effects in how long transmission distance will be made and how good is the received signal on the display, the actual transmission length is subject to high quality category cables. For resolution greater than 1080i or 1280x1024, a solid CAT6E 250MHz cable is the only viable choice.