Electrically Conductive Epoxy, Carbon Filled Adhesive, Room Temperature Cure, AA-CARB 61, 5gm kit

*******************Note: This product is not to be used for windshield repair******************* - PRODUCT DESCRIPTION: AA-CARB 61 is an epoxy adhesive and coating formulation based on conductive carbon.AA-CARB 61 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. AA-CARB 61 cures at room temperature or can be accelerated with mild heat to form a tenacious bond between similar and dissimilar substrates. - GENERAL PROPERTIES: Appearance: Black Cure Type: Heat Cure or Room temperature Benefits: • Continuity of conductivity • High adhesion • Wide operating temperature range • Mix Ratio by weight 100:10 / Resin:Hardener • Substrates: • Aluminum • Copper • Magnesium • Steel, • Bronze • Nickel • Ceramic • Glass • Phenolic, • G-10 epoxy glass boards Operating Temperature: -50 to 145 °C - TYPICAL APPLICATIONS: Electronic bonding and sealing applications that require both fine electrical and mechanical properties. - UNCURED PROPERTIES: Compressive Strength, psi: 13,000 Specific Gravity, mixed: 1.35 g/cc Pot Life: 30 minutes - CURE SCHEDULE: 15 minutes At 100°C 1 hour At 60°C 24 hours At 25°C - MISC PROPERTIES: Volume Resistivity ohm • cm < 40 Tensile Strength, psi 8,500 Shrinkage Linear 0.003 in/in Hardness, Shore D 85 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information. *******************Note: This product is not to be used for windshield repair*******************