Full Function Pro Controller Bluetooth Wireless Gamepad Joystick Console Support NFC HD Vibration Awaken for NS Switch
Full function with NFC + vibration + wake-up
Operating instructions:
1. Console settings
#1. To connect the Bluetooth controller, the controller connection (Bluetooth) option of the console is on, or flight mode is turned off;
#2. Select controllers > change grip / order on the main page to make the console in the status of searching Bluetooth devices. (this operation is not required for loopback);
#3. Note: if it is difficult for the console to pair with the controller, it may be that the console is connected with too many Bluetooth devices, and it is necessary to manually clear the Bluetooth information (system setting > controllers and sensors > disconnect controllers).
2. Controller matching console
When the controller is turn off, press and hold the small key beside the type USB for 3 seconds to enter the code matching state. The four LEDs are in the fast flow light state, and the channel indicator light corresponding to the successful connection is always on. If the synchronization is not successful within 1 minute, it will sleep automatically.
If Bluetooth connection is successful, the corresponding channel indicator LED is always on (assigned by switch console).
3. Controller back link to console.
When the controller is off, press any key to wake up the controller, When the controller is awakened, it will automatically connect with the paired consoler. If the connection fails in 6 seconds, it will automatically sleep
After the controller is connected successfully, if the controller does not operate, it will enter the sleep state according to the sleep setting of the console system. The console screen will close and the controller will sleep automatically.
4. Low voltage alarm
If the voltage of lithium battery is lower than 3.55v ± 0.1V, the current channel lamp flashes quickly to indicate that the voltage is low;
If the voltage of lithium battery is lower than 3.45v ± 0.1V, it will sleep automatically;
5. controller test
Key test: system setting > controllers and sensors > test input devices
3D test: system setting > controllers and sensors > calibrate control sticks
6. Reset test
Press the small button next to type USB to close the controller;
7. Use distance
The barrier free operation is about 8-10 meters.
Note: The reasons of some games themselves, such as Pocket Monster, Mario party, etc., do not support Pro controller, so these games can not use pro controller; biochemical crisis 1 and 2 using Pro handle has no sense of body.
product Weight with package: 328g
product size: 16.5x16x6.5cm
Product packaging: controllerx1, package box x1, charging cable x1