High Frequency Epoxy For Microwave EMI & RFI Shielding, PCB, Wave Guides, Electronic Modules, Flat Cable, 906, 2.5 Grams

- PRODUCT DESCRIPTION: AA-DUCT 906 represents the newest technology since the introduction of electrically conductive silver compounds. This unique formulation is based on a silver coated ceramic that results in lower material costs without adversely sacrificing the properties obtained with a pure silver formulation. This concept opens the door to a wide range of applications previously prohibited by the much higher cost of conventional silver conductive. AA-DUCT 906 cures at room temperature or can be accelerated with mild heat to form a tenacious bond between similar and dissimilar substrates such as aluminum, copper, magnesium, steel, bronze nickel, ceramic, glass, phenolic, and G-10 epoxy glass boards. AA-DUCT 906, because of its excellent continuity, has been used extensively in such diversified applications as, microwave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connections, and circuitry and as a cold solder. This unique formulation offers ease in handling due to its creamy consistency and versatile application by hand, automatic dispenser, silk-screening, transfer or stamping techniques. - PRODUCT PROPERTIES: Appearance : Silver Cure Type: Heat cure or Room temperature Benefits: + High strength + Perfect bond + EMI & RFI shielding + Cold Solder Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. - UNCURED PROPERTIES: Viscosity @ 25 °C cps: Paste Silver coated ceramic , %: 50 to 75 Pot Life @ RT: 1 Hour Mix ratio, by weight : 100:5 / Resin:Hardener Shelf life: 1 Year - CURE SCHEDULE: 15 minutes @ 100°C 30 minutes @ 60°C 24 hours @ Room temperature - CURED PROPERTIES: Volume Resistivity: < 0.0015 Hardness, Shore D: 81 Compressive Strength, psi: 13,600 Shrinkage Linear, in / in: 0.004 Specific Gravity, 25°C / 25°C: 2.60 Tensile Strength, psi: 8,900 Compressive Strength, psi: 13,700 - THERMAL PROPERTIES: Thermal Conductivity, btu / hr / ft2 / °F / in: 90 Thermal Expansion Coefficient, (cm / cm / °C • 10-5): 1.9 Heat Distortion, °C: 90 Operating Temperature Range, °C: -50 to +165 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 For More Informations.