Nexhi offers an SC-ST fiber optic patch cord. The SC-ST patch cable is constructed with Corning SMF-28 Ultra OS1 glass in AB to BA polarity to support high speed singlemode (SM) data transmissions. The SC/ST fiber optic patch cable is OS1 9/125 duplex tight buffered. The yellow jacket material around the OS1 9 125 singlemode fiber optic cable is a polyolefin halogen free flame retardant compound for OFNR safety rating. It is colored yellow to signify the fiber optic jumper cable is suitable for single mode high speed networking. The SC/ST patch cord is assembled with SC and ST connectors for a high density data center environment. An SC duplex connector with a blue coupling, boots and a clip is on one end, and two ST simplex connectors with yellow boots is on the other end.This breakout cable can reduce bulk fiber optic cabling by 50% with a 2mm duplex round cord. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA/EIA standards with a maximum insertion loss at 0.2dB. The data center grade duplex SC and ST fiber connectors meet EIA/TIA 604-2 standards with ceramic ferrule. The ferrule on the end of the singlemode fiber cable is pre-polished for a consequently consistent performance. Operating temperature for this OS1 fiber is -20C to +70C and minimum bend radius is 1.18in. Nexhi SC-ST patch cable is RoHS compliant and complies with industry standards. Each fiber optic patch cord is factory built and tested. Test reports are included.