Signal Generator 8A Driver Module for Motor/Lamp 1-Channel 1Hz-150KHz Dual Mode LCD PWM Pulse Frequency Duty Cycle Adjustable Module

Style: ZK-PP2This ZK-PP2 Signal Generator is used to provide electrical signals at a variety of frequencies, square wave, pulse and output levels.
It supports dual mode: PWM mode and PULSE mode. It supports high current output and can be directly connected to the motor. It is used as a signal source or excitation source for testing. Widely used in production practice and technology.
Practical Scene: 1>. LED brightness adjustment. Frequency, duty cycle adjustable. 2>. Motor speed adjustment. Frequency, duty cycle adjustable. 3>. Drive solenoid valve ON and OFF. Automatic cycle. The number of loops (or infinite loops) can be set. Delay time can be adjustable. 4>. Control device turning on and off. Verify the reliability of the device. 5>. Delayed start load. The delay time can be set. Always on or intermittent after a delay.
Using steps: 1>. Connect to power supply. 2>. Select work mode as following manual. 3>. Short or long press button FREQ+ or FREQ- to set parameter. 4>. Short or long press button DUTY+ or DUTY- to set parameter. 5>. Connect to load. For Specific Operating Steps and Work Modes Setting Method, please download User Manual on the Product Page Named "Technical Specification" Section (Due To Character Limit).
Parameters:
Size: 60*32* 13.5 mm
Work voltage: DC 3.3V -30V
Frequency range: 1Hz~150KHz
Motor speed control: 20KHz (Usually)
Frequency accuracy: 2%
Duty cycle range: 0.00 %-100%
Output Current: Less 8A (MOS Switch)
Number of pulses: 1~9999 or
Infinite Delay time: 0.000 s~9999s
Pulse width: 0.000 s~9999s
Time accuracy: 1ms
Output amplitude: Same to input voltage
Work Temperature: -40~85
Work Humidity: 0%~95%RH
Work Mode: 1)
PWM Mode: Frequency, Duty cycle; 2)
PULSE Mode: Pulse width, Delay, Pulse number