This hidden Fire Alarm Pull has the capability of recording and viewing live video from any computer in the world via your local network or through the Internet. Included is software that makes it easy to install the camera and configure the camera for your network. This software can be configured to watch and record up to 32 cameras remotely. The Fire Alarm Pull Station Wireless G Internet Hidden Surveillance Camera connects to an ethernet or wireless network to enable remote high-quality video recording. 802.11g wireless technology allows you to place the device in places that were previously inaccessible such as walls. The Fire Alarm Pull Station Wireless G Internet Hidden Camera is a versatile solution that connects to your wired or 802.11g wireless network to provide remote monitoring over the Internet. Schedule recorded video or snapshots to be uploaded to an FTP server or sent via e-mail. Easily configure and manage your camera: With the included software, you can manage up to 32 network cameras, set e-mail alert notifications, set recording schedules, and enable motion detection-triggered recording directly to a local hard drive. Features: The Fire Alarm Pull Station is none functional. Camera is powered by the power cord (12V DC). The camera is pointing out and straight down. The viewing angle is 70 degrees wide and 60 degrees tall. There are no beeps, no lights, no noise and no sign that a camera is inside. The video is easily playable on Windows Media Player or any other player (DivX, etc.) or through the internet. (DivX, etc.) Specifications: Camera: Sensor: VGA ΒΌ CMOS Lens: 4.57mm, F1.9 Minimum Illumination: 1.0 Lux @ F1.9 3A Control: AGC, AWB, AES Electronic Shutter: 1/60(1-50) ~ 1/15,000 Sec Video Formats: MPEG Compression JPEG for Still Images Resolution Up to 10fps at 640x480 Up to 15fps at 320x240 Up to 30fps at 160x120 Connectivity Wireless (802.11g) Wired (10/100 Fast Ethernet)