VGA switch 4 into 1 out, 3.5 audio and video vga monitor, sharing device, with remote EL-S401-C

Name: VGA 4 into 1 out of the converter Bandwidth: 500MHZ Resolution: 2560 * 1600 / 60HZ Size: 200 * 75 * 45MM Material: metal shell Output: with VGA output port Conversion method:Remote control conversion / button conversion Power: DC9V 300MA product features:   Beautiful appearance and easy to install, no need to install software; Support DOS, WIN3.X, WIN95/98/98SE/2K/ME/XP/NT, Apple, MAC Linux, Netware, Unix and other operating systems; Support hot swap, you can increase or decrease the computer at will, without having to turn off the switch; Support online games and hard disk recorders; Support resolution up to: 2560X1600@60Hz, bandwidth: 500MHz; An indicator (or display) indicates the host of the corresponding current state; Switching mode: 1 button on the front panel; 2 infrared remote control; With signal buffering function, it can effectively protect display devices; VGA supports DDC, DDC2, DDC2B functions, audio support headphones or microphone function; Transmission distance: VGA terminal = 30 meters, audio terminal = 100 meters; Use environment: -20 ° C to 65 ° C, relative humidity of 5% to 95%. Instructions for use: 1. Key switch: You can switch freely by pressing the button on the switcher panel; 2. Remote control switching: You can switch freely by pressing the number buttons on the remote control; or press the arrow buttons on the remote control to select the previous one (“?”, “?”) or the next one (“?”, “ ?") host.   Switching method: 1. Press the corresponding port host button on the panel to switch; 2. Press the corresponding host button on the remote control to switch; 3. When the current VGA signal source is disconnected, the switch automatically detects the switch (version C and later versions have this function);          When the currently input VGA source is disconnected, it automatically switches to the next highest priority signal input source. The priority of the signal input source is: PC1, PC2...PCn          When all sources are disconnected, the input jumps to the highest priority of the source, ie: PC1 4. When the VGA signal source is newly inserted, the switch automatically detects the switch (version D and later versions have this function)          When a new VGA source is inserted, the switch automatically detects the input source and automatically switches to the currently inserted VGA signal input source port. To cancel the automatic detection function: press the button SHUT on the remote control (this state can save the memory after power off, version D and later versions have this function) Start automatic detection function: press the button OPEN on the remote control (this state can save the memory after power off, version D and later versions have this function)