Xtrempro 2 Way Speaker Switch, 1 in 2 Out Way Pair Stereo Speaker Selector W/Screw Type Connections Metal Non-Slip Box - Black (61049)

Xtrempro 2 Way Speaker Switch, 1 in 2 out Way Pair Stereo Speaker Selector W/ Screw type Connections Metal Non-Slip Box - Black Features: The product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. * 2 Channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices * Ideal for low cost distributed audio in residential or commercial sound applications * Individual control of each speaker pair. Impedance constant at 4-16 Ohms, 150W(Per Channel), 300W max, Cable Length: Max 164ft/50M * Just hooked up to the stereo. No extra power supply needed * Metal Non-Slip Box, 5in x 3in x 1.5in (2 Way) * Amplifier Inputs x1 * Speaker Output x2 * Load: 150 W per channel * Cable cross-section: max. 2.5 mm² * Loudspeaker resistance: 4 - 16 ohms Package Contents: * Main unit x1 * User Manual x1 Connection: * Failure to observe the following instructions can lead to damage to the product, the loudspeakers, and the amplifier. * Turn off the amplifier before connecting the cables. Check all cable connections before turning on the amplifier. * Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. * Use suitable loudspeaker cables only. * Connect passive loudspeakers to the loudspeaker outputs only(no active loudspeakers). * Connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. * Refer to the user manual of the amplifier and the loudspeakers concerning their respective technical data and any special information concerning their connections.