2019 PortaPack + HackRF One SDR + Metal Case +TXCO + Havoc Firmware Programmed

The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.
You can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed!
According to source code: github.com/sharebrained/portapack-hackrf
Redesign this hardware and share it to the enthusiast.

Progress of work:
1. has completed the program validation prototype.
2. the latest 2017.5 month documents are based on improvements.

Capture and Replay
One of the best things about the PortaPack is that it makes capture and replay of wireless signals like those from ISM band remote controls extremely easy. To create a capture you just need to enter the "Capture" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote. Then stop the recording to save it to the SD Card.

Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.

Microphone TX
Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones

Receivers
By connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled youcan receive aircraft.
Hardware configuration:
1.TFT240*320 screen (model: ER-TFT024-3)
2. navigation switch (TSWB3NCB222)
3. audio output
4. microphone input
5.DC2.1 interface
6.4 layer gold plate
7.ROSH process (exported to Europe and America)
The latest version is updated with the latest documents in 2017.5 month
Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).
HAVOC FEATURES INCLUDE
IQ file replay
Microphone FM transmit with CTCSS
CTCSS decoder
Frequency manager (save & load from SD card, with categories and notes)
File manager
"Soundboard" wave file player (put 8-bit mono files in SD card /wav directory)
ADS-B receiver with map view
SSTV transmitter
Fully configurable transmit signals
POCSAG transmitter
POCSAG receiver/decoder
Morse transmitter (FM tone and CW)