4W 4000mW 802.11b/g/n Wifi Wireless Amplifier Router 2.4Ghz WLAN ZigBee Bluetooth Signal Booster with Antenna

Specifications:
Frequency range: 2.4-2.5GHz
Operating voltage: 6-16V
Receiving gain: 10dB1
Transmission gain: 13dB1
Input trigger power: 3dBm(min), 20dBm(max)
Max output power(P1dB): 36dBm(4W)
EVM: 3%a28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC supply current: 435mA a Pout 28dBm 9V
Noise figure: <2.5dB
TX/RX switch time delay: <1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40c~70c
Operating humility: Up to 95% rel. humidity
Item size: 8.2 5 2.1cm / 3.22 1.96 0.82in (L W H)
Item weight: 181g / 6.39oz
Package size: 21 12.5 5cm / 8.26 4.92 1.96in (L W H)
Package weight: 381g / 13.43oz
Applications:
Wireless LAN 802.11b/g/n access point clients.
Based on the 2.4GHz WLAN wireless base stations.
Based on the 2.4GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, Bluetooth protocol wireless devices.
Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.