Introduction: You can set the voltage you want to spot weld different nickel sheets. If the current is too large, you can reduce the voltage to control the current. It can weld different nickel sheets very firmly. The encoder switch can be extended.; you can install it as you like. Do not need to step down or boost, use it directly, the equalization effect is also very good.
Data:
1.
Input voltage: 12V to 19V2.
Power: Above 72W (Calculation formula example 12VX6A=72W, then 14V/16V/19V is the same, the voltage multiplied by the current is equal to how many W)3.
Model: CPSMC6Y8804.
Size: 50MM*90MM
Packge includes: 1 x; Control Board kit