ANTOP Coaxial Cable Splitter Ultra Mini Distribution for Satellite TV Antenna Signals 2GHz- 5-2050MHz (AT-707)

Description
ANTOP 2GHz RF Splitter 1 in 4 out, AT-707

The ANTOP 4-ways Splitter AT-707 splits a single incoming coaxial signal, such as satellite signal, over-the-air HD (digital TV) antenna signal, into four outgoing signals.

Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer, corrosion resistance, and reliable connectivity.

All ports DC Power Passing enables DC power from all outputs to pass the power to the input (or in the opposite direction). Thus all satellite receivers can supply LNB power, while all amplified outdoor antenna or masthead amplifier can be powered from the interior power supply devices. Care should be taken to ensure the input of a receiver will not be damaged by power from another receiver. Reverse powering protection is provided in many receivers and systems.

Product Information
All ports female F connector 75 Ohm
All ports DC power pass
Light weight and compact size
Zinc die-cast with 18K gold-plated
Low insertion loss, high return loss and isolation for satellite and over-the-air HDTV signal
Two pieces of screws attached

Technical Specification
Screening factor: 5-300MHz=75dB,300-470MHz=75dB, 470-1000MHz=65dB,1000-2050MHz=55dB
Insertion Loss: 7.5dB(5-47MHz),8.5dB (47-1000MHz),9.5dB (1000-1750MHz),11.5dB (1750-2050MHz)
Isolation: 20dB (5-2050MHz)
Return Loss: 10dB (5-47MHz),12dB (47-2050MHz)
Receiving Range: TV/SAT.
Impedance: 75O
All Port DC Pass: 24V/200mA (max.)