Beta65S Brushed FPV Whoop Drone 1S Frsky FPV Quadcopter with F4 1S Brushed FC M01 AIO Camera 25mW 716 19000KV Motor for Tiny Whoop FPV Racing

Color: Frsky Rx Beta65S Frsky Whoop Drone 1S Brushed FPV Quadcopter with F4 FC SPI Frsky Receiver M01 AIO Camera 5.8G 25mW VTX 19000KV 7X16 Motor for Tiny Whoop FPV Racing 3 improvements based on Beta65 drones.
Motors: 6x15mm -> 7x16mm brushed motors
Frsky Receiver: F3 FC -> F4 FC SPI Frsky OSD - The latest F4 brushed FC has upgraded firmware to Betaflight 3.4. 1, SPI Frsky D16 (Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam M01 VTX 25mW- This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens. Binding Procedure The binding procedure is reversed as usual. No need to click the bind button when power on. Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash. The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter. For detailed procedure of binding, please
check the here:
https: //. freshdesk.
com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board Specification Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with
OSD-UK:
https: //www.. co.
uk/dp/B07DMDZ1LH Firmware Version: Betaflight MATEKF411RX 3.4.
0 Motor: 7x16mm Coreless Brush Motor, 19000KV
Receiver: Frsky D16 potocol
Camera: M01 AIO Camera 5.8G 25mW
VTX Batterry: 300mAh 1S Lipo battery
Flight time: 3 minutes 30sseconds
Package Included: 1 * Beta65S BNF Frsky 2 * 300mAh 1S Lipo Battery 1 * Canopy for Micro Camera 1 * Carry-on bag 1 * Screwdriver