Cambium Networks 3 GHz connectorized subscriber module is part of the industry leading PMP 450i product line. It is the most scalable industrial-grade wireless broadband solution available. Cambium Networks 3 GHz connectorized access point is part of the industry leading PMP 450i product line. It is the most scalable industrial-grade wireless broadband solution available. Product Features •
Ultra-Wide Band: Radios support the entire band, advanced radio design improves transmit power and increases receive sensitivity.
• Rugged Metal Enclosure: Designed to meet IP-66 and IP-67 standards to withstand harsh environments.
• Dynamic Interference Filtering: Provides industry leading noise isolation for improved performance. • Updated FPGA and SoC architecture triples the processing power compared to PMP 450.
• Multi-function AUX Power: Allows for greater flexibility for deployment by adding a camera or other PoE directly. Product Specifications •
Channel Spacing: Configurable on 2.5 MHz increments, 3 GHz customizable to 50 KHz •
Frequency Range: 3300 to 3900 MHz •
Channel Width: 5 / 7 / 10 / 15 / 20 / 30 MHz • MAC (Media Access Control)
Layer: Cambium Networks proprietary •
Physical Layer: 2x2 MiMO OFDM •
Ethernet Interface: 100/1000BaseT, full duplex, rate auto negotiated ( 802.3 compliant) •
Protocols Used: IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP,, FTP 1ad (DVLAN Q-inQ), 802.1Q with 802.1 p priority, dynamic port VID •
ARQ: Yes •
Maximum Deployment Range: Up to 40 miles (64 km) •
Latency: 3 - 5 ms, typical •
GPS Synchronization: Yes, via Autosync (CMM3, CMM4) •
Quality of Service: Diffserve QoS •
Antenna Connection: 50, N-Type •
Surge Suppression: EN6100-4- 5:1. 2us, 500 V voltage waveform •
Mean Time Between Failure: > 40
Years • Environmental: IP66, IP67 •
Temperature / Humidity: -40 to 60°C (-40 to 140°F), 0 to 95% non-condensing •
Weight: Approx. 2.0 kg ( 4.5 lbs) •
Wind Survival: 322 km/h (299 mph) •
Dimensions: 26.0 x 13.4 x 6.4 cm ( 10.3 x 5.3 x 3.3 ) •
Power Consumption: 15 W typical, 25 W max, 55 W max with Aux port PoE out enabled •
Input Voltage: 48 - 59 VDC, 802.3 at compliant •
Mounting: Wall or Pole mountable •
Encryption: 56-bit DES, FIPS-197 128-bit AES •
CE: EN 302 326-2 v 1.2. 2 / EN 302 326-3 v 1.3. 1 Product Documentation C030045C001A Datasheet _DELETE_