DIY Analog Multimeter Soldering Practice Kit with Assembly Manual

NOTE: This kit requires assembly with a soldering iron. Soldering iron and solder are not included. The AMK-200 analog multitester is a compact, portable VOM (Volt-OHM-Milliamp) meter in kit form. An English assembly manual is included. It features 20K ohm/volt input resistance on the DC voltage scales to minimize circuit loading and improve accuracy. The 50 micro-amp meter movement is diode protected and allows a 0.1 volt full-scale range for low voltage level measurements. The AMK-200 will measure AC and DC voltage and current, resistance, and audion signal dBm. In addition, the AMK-200 can measure transistor gain (hfe) and check diode continuity. Specifications: DC Volts: 0 to 2.5V, 10V, 50V, 250V, 1,000V. AC Volts: 0 to 10V, 50V, 250V, 1,000V. DC Current: 0 to 5mA, 50mA, 500mA, 10A. Resistance: X1, x10, X1K. Sensitivity: 20,000 ohm/V DC and 8,000 ohm/V AC. DC Voltage Range: 0.1/0.5/2.5/10/50/250/1000V AC Voltage Range: 10/50/250/1000V DC Current Range: 50µ/2.5m/25m/0.25A Resistance Range: Rx1x10x1kx10kO Transistor Test Range: 0-1000 hFE Range: 0-1000V Decible Range: ?10-?22dB DCV Sensitivity Range: 20kO/V ACV Sensitivity Range: 9kO/V Size: 148x100x36mm Weight: 280g 9V and 2x AAA batteries are included.