Hall Research UHBX-6S 1x6 HDMI on HDBaseT Splitter

The UHBX-6S is an HDMI splitter with one local HDMI output and 6 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-6S provides convenient front panel LED status indicators for all HDBaseT™ parameters to quickly verify proper operation.

The UHBX-6S supports PoH (Power over HDBaseT™). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT™ compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.

Compatible receivers include the economical UH-BT-R & UH-BTX-R for HDMI only or the UHBX-R-PD that supports RS-232, PoH, and Long Reach modes.

Features:

• Extend HDMI video to 6 remote displays using HDBaseT™
• Use a single UTP cable to extend video to 100 meters (330 ft)
• Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
• Supports virtually all HDMI and DVI resolutions
• Local HDMI output for direct connection to a local display
• EDID management with USB port for EDID manipulation using a PC
• RS-232 port for sending commands to remote displays
• Power-over-HDBaseT™ meets IEEE 802.3af standard