Hall Research - UHBX-S-WP - HDMI/RS232/IR/PoH UTP HDBaseT Extender Wall Plate Sender

UHBX-S-WP is a single gang wall plate sender module which when paired with compatible receiver ( Hall Research model UHBX-R-PSE ), can extend HDMI, bi-directional and PoH (power over HDBaseT) over distances of up to 150 meters (500 feet) using a single Cat6 cable. The pair can extend HDMI or single-link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m). Moreover, these extenders complies with Power-over-HDBaseT or PoH, hence only one end requires a power supply . The end identified as PSE (power sourcing equipment) injects power on to the Cat6 cable and the side identified as PD (powered device) is powered through the Cat6 cable. The PSE side requires connection of an AC adapter that supplies 5v DC, while the WP(wall plate) side is simply powered through the RJ45 connector from the opposite side. FEATURES Extends HDMI or DVI video to 500 ft on just one Cat6 Includes RS232 and IR extension in both directions Supports virtually all HDMI and DVI resolutions including 4Kx2K Only one end requires power, other side is powered via UTP Power-over-HDBaseT meets IEEE 802.3af standard Sturdy metal enclosures with mounting provisions Complies fully with HDBaseT standard Runs from just one +5vDC supply RS232 Supports all baud rates regardless of presence of video IR extension is carrier frequency agnostic and supports 30 KHz to 60 KHz modulation to provide compatibility across all IR standards Fully isolates ground between TX and RX sides Compact, Rugged, Reliable, and Economical Made in USA Specifications: Max Distance: Standard Mode (STD): 330 ft (100m) Long Reach Mode (LR) : 500 ft (150m) Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support) Signal Type: TMDS Connectors: Locking HDMI Video Resolutions: DVI: VGA (640x480) to WUXGA (1920x1200) HDTV: 480i to 1080p Digital Cinema: 4K (4096x2160) Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate) DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake CEC: Pass-Thru DDC for Consumer Electronics Control compatible devices RS232: Bi-directional (full-duplex) any baud rate upto 115, 200 IR: Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz PoH: Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.846.49 watts). Actual power consumption of PD side is 5.5 watts max Power Supply: 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated Actual DC current (powering both PSE and PD sides) 1.8A max Power: Sender: 3.5 watts (12 BTU) maximum Receiver: 5.5 watts (19 BTU) maximum Temp/humidity: Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, non-condensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, non-condensing Cooling: Convection Mounting: End plates have L bracket with hole for surface mounting Enclosure: Metal (Steel ends and Aluminum extrusion) Dimensions: 1.18 H x 4.13 W x 4.57 D (30mm H x 105mm W x 116mm D) Depth excludes connectors Product weight: Sender: 9.3 oz (0.58 lb or 264 g) Receiver: 10 oz (0.63 lb or 284 g) Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, power supply, power cord, HDMI cable, manual, and packaging Vibration: ISTA 1A in carton (International Safe Transit Association) Safety: CE EMI/EMC: CE, FCC Class A MTBF: 90, 000 hours (Calculated Estimate) Warranty: 2 years parts and labor Max Distance: Standard Mode (STD): 330 ft (100m) Long Reach Mode (LR) : 500 ft (150m) Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support) Signal Type: TMDS Connectors: Locking HDMI Video Resolutions: DVI: VGA (640x480) to WUXGA (1920x1200) HDTV: 480i to 1080p Digital Cinema: 4K (4096x2160) Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio