Hotspot Spot Radio Station WiFi Digital Voice Modem Supports Digital Radio Only NXDN POCSAG P25 YSF DSTAR C4FM DMR

For the following 3 cases (i. Ii. Iii. ), Please contact HKCNMA Co., Ltd, we will provide technical support immediately. i. The screen will not turn on. ii. It Does NOT Work. iii. It NOT connect to the Internet. Please set for OLED type3, ttyAMA0, G4KLX., STM32-DVM/_HS-Raspberry Pi Hat (GPIO) and Apply Changes, the OLED will work. Please contact us. 2. Please place HOTSPOT within 5 meters from WIFI, please be careful not to be blocked by the wall, otherwise IP unknown will appear, because ZERO W does not have WIFI receiving antenna, WIFI receiving ability is worse than mobile phone or computer.

3. We will send the HOTSPOT to you after test call at 439.550. 000MHz frequency, so we save the call sign and other information of BD7OAY. After you receive the unit, set HOTSPOT to connect to your house WIFI and set your RADIO RX / TX frequency to 439.55MH z, RX and TX should be set to the same frequency because the HOTSPOT is simplex. 4. Hotspot does not support 5.8G, only 2.4G. If your cell phone supports 5.8GWIFI, please turn off 5.8G, so that Verizon mobile can provide 2.4G signal to HOTSPOT (E.

g. The S9+ supports a 5Ghz hotspot and 5 GHz (only) enabled by default). 5. The shell is made of aluminum, and there may be defects in the manufacturing process (For example, Bump marks). 6. The engraving characters are placed by hand on the engraving machine. The engraving position may be up or down. If you mind the above, please buy with caution.
Basic Setup: After power on 2 minutesuse computer to connect to temporarily
WIFI: pi-star (or Pi-Star-Setup) then you can access the device through your web browser go to http: //pi-star. local/admin/configure. php Login username is pi-star Password is raspberry And then save your own house WIFI details to HOTSPOT according to the step 2 of the instruction manual. Not include cable.