LLA1 VIKING ELECTRONICS LONG LOOP ADAPTER

Extend Analog PABX Station Loop Length to 30, 000 Feet Direct Replacement for Proctor model 46222 Long Loop Adapter The Viking model LLA-1 provides long line and off premise extension (OPX) capabilities for PABX and KSU analog stations, ISDN terminal adapters, channel banks, etc. The long loop adapter converts any low talk battery voltage or weak ringing analog line into a standard 48V line with powerful 20HZ sine wave ring signal. The LLA-1 is compatible with pulse dialing, touch tone dialing, hook switch flash features, CPC signaling, and Caller ID features. A ground screw terminal allows for improved surge protection and as a earth ground reference for the regenerated line. The long loop adapter is easy to install, requires no programming, and can be used as a direct replacement for the discontinued Proctor model 46222 long loop adapter. Applications Turn a standard station into an on-premise or off-premise extension (OPX) Give any low voltage line or station from an ISDN terminal, KSU, PABX, etc. the talk battery and ringing power of a standard C.O. line Convert a polarity reversal DC ring signaling line to a typical 20Hz AC ringing line Features Convert an analog KSU/PABX station to a standard voltage OPX Provides 48 VDC talk battery Provides 20 HZ, 10 REN sine wave ringing Passes Caller ID information Passes hook switch flash DTMF and pulse dialing compatible Passes CPC signals Electrically isolates PABX station from extended loop Provides additional lightning and surge protection Selectable ring protocols Specifications Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75) Shipping Weight: 1.36 kg (3 lbs) Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity Talk Battery: 48 VDC (minimum) Ring Generation: Sine wave 105 VAC @ 20 HZ (nominal), capable of ringing 10 REN load Dialing: Pulse (10 pps) and DTMF compatible Hook Switch Flash Timing: From 200ms to 500ms increased to 500ms CPC Timing: Duplicates original CPC timing Electrical Isolation: 1500 VDC Facility Interface Code: OL13C Audio Loss Through Unit: 1.3 dB Connections: (6) screw terminals