125KHz / 13.56MH z Frequency NFC Smart Card Reader Writer
Product Specification: Compliant with CCID, PC/SC Driver-free, no need to download software installation Has a USB interface Has Two-color LED light prompt Built-in buzzer "beep" sound reminder
Dimension: 108X 68 X 12 mm
Working frequency: 125KHz, 13.56MH z
Working Voltage: 5
V DC Working current: 200mA
Standby current: 50mA
Normal current: 100mA
Working frequency: 125KHz / 13.56 MHz
Support card type: for 125KHz
ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. For 13.56MH z
IC type: Mi-fa re 1k, UID, FUID, CUID, UFUID, a lot of IC Half-encryption, a lot of IC Full-encryption etc.
Supported operating systems: 98 Win, Win ME, Win 2000, Win XP, Win Vista, Win 7, Windows Server 2003, Windows Server 2008, Windows XP x64, Win Vista x64, Win 7x64, Win Server 2003x64, Win Server 2008x64, Win Server 2008 R2 x64. Not support Mac and LINUX etc. Read and write ordinary 125KHz RFID card
1. Place the card on the card reader and press "Read EMID" on the software to scan the card.
2. The software will scan and display the card number
3. Place a writable T5577 (125KHz writable chip) on the card reader and press "Write EMID" on the software. Read and write 13.56MH z IC, IC half encryption card, IC full encryption card
1. Place the card on the card reader and press ‘Read’ on the software to start decryption. 2. "v" means that the decryption was successful, and "X" means failure.
3. After the decryption is successful, the software displays the card number.
4. Place a writable UID ( 13.56MH z writable chip) on the card reader and press "Write Type-A" on the software. Pack List 1 x RFID Reader writer 1 x USB cable 5 x RFID UID keyfobs (used to copy 13.56MH z key cards) 5 X RFID T5577 Keyfobs (used to copy 125KHz key cards)