This listing is st-iphd-r-poelc Receiver only. Use description below as a general reference.
The XTENDEX? Low-Cost HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 393 feet away over a 1000Base-T Gigabit Network connected with CAT5e/6/7 cable.
Each Low-Cost HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx cable or a Point-to-Many connection via a network switch.
Features
- Supports HDTV resolutions up to 1080p.
- Ideal solution for digital signage applications.
- Power over Ethernet (PoE) - power supply not required at the local or remote unit.
- Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
- Transmits an HDMI signal over one CAT5e/6/7 cable.
- Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
- Plug-and-Play installation allows receivers to find the transmitter automatically on the same subnet. (Network configuration may be required for managed network switch.)
- Web interface for firmware updates.
- Easily expandable. Add remote units as you add monitors.
- Supports a maximum of 253 receivers.
- Inexpensive CAT5e/6/7 cable replaces bulky video cables.
- Supports 10/100/1000 Ethernet connection.
- Built-in default EDID table.
- HDCP compliant.
- Local and remote units must be in the same LAN. The units do not support WAN connections.