*Product availability is subject to suppliers inventory
Brand | PANAMAX |
---|---|
Type | Power Conditioner |
Color | Black |
Connectors | 1 |
Specifications | AC Power Line Voltage: 120V, 60Hz Voltage Regulation: No Total Current Capacity: 15 A (1800 W) Protection Modes: L-N, L-G, N-G Initial Clamping Level: 200V Peak, 141V RMS Energy Dissipation: 2125 Joules Peak Impulse Current: 75,000 Amps Catastrophic Surge Circuit: Yes Thermal Fusing: Yes Auto-resetting Over-voltage shutoff: 142 VAC +/- 8 VAC Auto-resetting Under-voltage shutoff: 86 VAC +/- 6 VAC EMI/RFI Noise Filtration Bank 1: Up to -86 db (100 KHz - 2 MHz) Bank 2: Up to -91 db (100 KHz - 2 MHz) Bank 3: Up to -81 db (100 KHz - 2 MHz) Bank 4: Up to -100 db (100 KHz - 2 MHz) Bank 5, High Current Outlets: Up to -81 db (100 KHz - 2 MHz) DC Trigger Input Jacks: 3.5mm (1/8") mono mini-plug Voltage and Polarity: 3 - 24V DC, bidirectional Current Requirement: 4.6 mA @3V, 58 mA @24V LAN Protection Clamping Level: 60V +/- 5V Compatibility: 10/100bT Connectors: RJ-45 Wires Protected: 8-Wires USB Circuit Jacks: USB-A Power Delivery: 500 mA @5VDC Telco Protection Fuseless/Auto-resetting: Yes Clamping Level: 260V Capacitance: 30pf (approx.) Suppression Modes: Metallic & Longitudinal Connectors: RJ-11 Lines Protected: 2-Wire, Pins 4 & 5 Universal Coax Protection HD 1080 i/p Ready: Yes Bidirectional: Yes Shielded: Yes Clamping Level: 75V Frequency Range: 0MHz - 2.2 GHz Insertion Loss: < 0.5 dB Connectors: Female "F", Gold Plated |
Dimensions | 17" W x 12.75" D x 3.5" H, (4.1" Including feet) |
Weight | 14 lbs. |
Color | Black |
Improves Picture and Sound Quality
Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail pops hisses hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamaxs patent pending AVMTM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage a flashing red lightning bolt will be displayed in the voltmeter and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components
The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.
Specifications
General
AC Power
EMI/RFI Noise Filtration
DC Trigger Input
DC Trigger Output
LAN Circuits
USB Circuit
Telco Protection
Universal Coax Protection