Brand |
Smart-AVI |
Model |
UX-PROS |
Feature |
Supports dual screens.
Uses easy to install, inexpensive CAT-5/5e/6/7/8.
Each output reaches up to 275 feet (83.2m).
Supports high resolution video up to 1900x1200
HDTV compatible (720p, 1080i, 1080p)
300 MHz bandwidth
Sends high-resolution WUXGA, stereo audio signals, RS232 or IR from one source to 2 locations.
Compatible with VGA, XGA, Sun, MAC and SGI
Sync Format/Polarity Preservation.
Extends USB port up to 275ft from computer.
Uses one CAT5(UTP) cable for USB transmission.
Remotely acessing your USB devices are made convienient in a variety of situations.
4-port USB hub with the RX(receiver) unit.
Compatible with Line Level Stereo Audio Singals.
High ground loop immunity.
Built-in power surge and transient protection.
Designated trimmer in the remote unit to compensate for cable length.
Compact metal case enclosure.
External power supply.
RS-232 communication support to single or multiple displays.
IR command to single or multiple displays.
USB1.1 device
Uses one CAT5(UTP) for each WUXGA/Audio/RS232 and IR signal transmission.
Supports USB Keyboard, USB Mouse + additional USB 1.1/1.0 device |
Dimensions |
0.94" x 7.75" x 3.38" |
Weight |
0.6 lb. |
Model: UX-PROS - 4-port USB+VGA+Audio+RS-232/IR CAT5 Extender Kit (275ft/HDTV) UXPRO is a high resolution UXGA and stereo audio extender system(transmitter and receiver) designed to broadcast desktop video, stereo audio signals, IR/RS232 and USB1.1 over unshielded twisted pair(UTP) cabling. With RS232 communication support the UXPRO allows users to send commands to a single or multiple devices. This allows the user to change the volume or turn on/off the display panel remotely. Remotely accessing your USB device is made convenient in a variety of situations. You can locate users away from hazardous industrial enviroments where the USB device is located. Locate devices away from areas vulnerable to theft of hardware and data, reduce noise and heat; increase desk and floor space. Take full control of your remote screens With UXPRO you get full RS232 bidirectional communication to your remote gives you the power to access information such as screen operation logs from your remote gain valuable insight into when and how the screen is being used, it's effectiveness and how much life is left on your can also send power commands such as on/off to one or all of the screens in the group. The RS232 feature saves you time and money by better managing and prolonging the life of your digital signage network. UX-PROS USB+UXGA+Audio+RS-232 or IR CAT5 Extender Link. Includes: [UXP-TX, UXP-RX, (CCUSBAB06), (CCVGAMM06) and 2 x (PS5VD1A)] UXP-TXS USB+UXGA+Audio+RS-232 or IR CAT5 Transmitter. Includes: [UXP-TX, (CCUSBAB06), (CCVGAMM06), & (PS5VD1A)] UXP-RXS USB+UXGA+Audio+RS-232 or IR CAT5 Receiver. Includes: [UXP-RX & (PS5VD1A)] FEATURES Supports Multiple Screens Uses Easy-to-Install CAT5/5e/6/7/8 Each Output Extends 1, 000 Feet Plus Supports High-Resolutions Video up to 1920x1200 HDTV-Compatible(720p, 1080i, 1080p) 300 MHz Bandwidth Sends High-Resolution VGA Stereo Audio, RS-232 and IR Signals From up to *16 Sources to as Many Display Screens(*Model-Dependant) Compatible With VGA, XGA, Sun, Mac and SGI Sync Format/Polarity Preservation Compatible With Line Level Stereo Audio Signals High Ground Loop Immunity Built-In Power Surge and Transient Protection Designated Trimmer in Remote Unit to Compensate for Cable Length Compact Metal Case Enclosure External Power Supply RS-232 Communication Support to Single/Multiple Displays IR Command to Single/Multiple Displays Video data Format RGBHV, RGsB, YUV, Y/C, CVBS Resolution Up to 1900 x 1200 VGA, SVGA, XGA, SXGA Connector Type HD 15 socket USB USB 1.1 (low and full speed) Transmitter USB Type B Receiver 4 USB Type A Audio Signal Type Stereo unbalanced Connector 3.5mm jack socket RS232 DB9M TXD, RXD, Gnd. 9600 bps Power Connector 2.1mm DC jack (center +ve) Mechanical Height 0.937 in. (24 mm.) Width 7.75 in. (197 mm.) Depth 3.38 in. (86 mm.) Weight 0.60 lb. (0.27 kg.)