Transition Networks SGETF1014-110 Gigabit Ethernet Media Converter SGETF1014-110-NA

Dimensions (Overall): 11.99 inches (L), 2.99 inches (H) x 9.99 inches (W)
Weight: .65 pounds
Cable/Cord Length: 6 feet
Connection Gender: Male-To-Female
Connection Types: RJ-45 (Ethernet)
Data Transfer Rate: Up to 1 Gbps
Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item,
• Sold as 1 Each.
• Interfaces/ports: 1 x RJ-45, 1 x SC. Dimensions: 1.0"(H) x 3.3"(W) x 4.8"(D).
• Connectivity technology: Wired Media type supported: Twisted pair, optical fiber.
• Fiber mode supported: Single-mode, Maximum distance supported: 6.21 mile. Ethernet technology: Gigabit ethernet, Network technology: 1000Base-T, 1000Base-LX.
• Standards: IEEE Std. 802.3ab and IEEE Std. 802.3z. Form factor: Rack-mountable, wall mountable, Data transfer rate: 1 Gbps, Optical wavelength: 1310 nm.
Transition Networks Gigabit ethernet media converter will automatically re-establish link in all network conditions and allows pause signaling feature that temporarily suspends data transmission between two devices. Transition Networks SGETF1014-110 Gigabit Ethernet Media Converter Interfaces/ports: 1 x RJ-45, 1 x SC. Dimensions: 1.0"(H) x 3.3"(W) x 4.8"(D). Connectivity technology: Wired. Media type supported: Twisted pair, optical fiber. Fiber mode supported: Single-mode, Maximum distance supported: 6.21 mile. Ethernet technology: Gigabit ethernet, Network technology: 1000Base-T, 1000Base-LX. Standards: IEEE Std. 802.3ab and IEEE Std. 802.3z. Form factor: Rack-mountable, wall mountable, Data transfer rate: 1 Gbps, Optical wavelength: 1310 nm. Status LEDs: power, fiber receive, fiber link, copper receive, copper link, power: external AC/DC required, 12 VDC, 1.5 A, unregulated, standard. Operating temperature: 32 to 122 deg F, Humidity range operating: 5 - 95%. SW1: Remote fiber fault detect (down=enabled), SW2: Symmetric pause, SW3: Asymmetric pause, SW4: Transparent link pass through (UP=enabled), SW5: Fiber auto-negotiation (down=enabled), SW6: Loopback (down=enabled). Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link. Transparent link pass through sends a link-loss signal over the fiber, instructing the remote converter to shutdown the copper port - thus notifying the end device. Transition networks's converters will automatically re-establish link in all network conditions. Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. Certifications and standards: FCC class A certified, UL, cUL, EN55024, EN55022 class A. Warranty: Lifetime limited. Interfaces/ports: 1 x RJ-45, 1 x SC. Dimensions: 1.0"(H) x 3.3"(W) x 4.8"(D). Connectivity technology: Wired Media type supported: Twisted pair, optical fiber...