VK172 USB GPS Dongle Module Vk172 GPSGLONASS USB Navigation Works for Stratux Windows 10 Linux Mac for Arduino Raspberry PI Google Earth

Note: It can support Windows Mac and Linux system, but it can not support android system
Description: Chip u-blox 7020 chip Support Windows system, Linux system, Raspberry PI and EMGRAND car Support Google Earth C / A code, 1.023MH z stream
Receive Band: L1 [ 1575.42MH z]
Tracking Channels: 56 Support DGPS [WAAS, EGNOS and
MSAS] Positioning performance: 2D
plane: 5m
[average] 2D plane: 3.5 m [average], has DGPS auxiliary
Drift: < 0.02 m / s
Timing Accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18, 000 m
Maximum speed: 500m / s
Acceleration: <4g
Electrical properties: Tracking
sensitivity: -162dBm
Acquisition sensitivity: -160dBm
Cold Start Time: 29s [average]
Warm start time: 28s [average]
Hot start time: 1s [average]
Recapture Time: 0.1 s [average]
Operating temperature: -30 to +80 It does not support
USB 3.0 NOTE: The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data U7 program, use the
GLONASS switch command: B5 62 06 3E 24 00 00 00 16 04 00 04 FF 00 00 00 00 00 01 01 03 00 00 00 00 00 05 00 03 00 00 00 00 00 06 08 FF 00 01 00 00 00 A0 D9 B5 62 06 3E 00 00 42 D2 U7 program, use the
GPS switch command: B5 62 06 3E 24 00 00 00 16 04 00 04 FF 00 01 00 00 01 01 01 03 00 00 00 00 01 05 00 03 00 00 00 00 01 06 08 FF 00 00 00 00 01 A4 25
U-center Windows Link:
https: //www. u-blox. com/en/product/u-center-windows For raspberry pi, there is no need driver, you just need plug and it can work User Guide documentation on Windows Sensor Driver can be found at https: //www. u-blox. com/en/product-resources/2681 Package Includes 1X USB GPS Module