Wireless Panel is ideally suited for directional and multipoint 5.8 GHz band applications. WiFi Panel Antenna is the most popular type of directional antenna in use today. The 22dBi 5.8GH z Outdoor Panel Antenna offers 12 deg Vertical and 10 deg Horizontal Beamwidth. This WiFi Antenna comes with an N-Female connector. N-Female is an industry standard connector. It has threads on the outside and a center socket. The Yagi antenna operates without the need for a grounding in most cases. However, you can ground antenna via the outer conductor of the connector and the cable, or through the mounting hardware.
We do, however, recommend you install a lightning surge protector between the Panel antenna and a device to prevent a lightning strike to the antenna from damaging your device and equipment. Wireless Panel Antenna TP544 in most cases cannot be attached directly to the device (wifi router, signal booster, etc. ) without some type of cable converter/adapter This Antenna has an N-Female connector so it will need the cable/converter from N-Female type to [your device connector type], usually some pigtail coax RP-SMA cable connector. Also, you can put amp of some kind of signal booster between device and antenna.
The antenna does not come with mast pole mount; it comes with two U-bolts which can be used with the attached plate for pole mounting. It allows horizontal or vertical polarization. The Panel antenna is used to direct the WiFi beam. It will increase the signal/reception in the direction it is pointing.