Wire Tracker, Multifunctional RJ11 RJ45 Cable Tester Line Finder with NCV Probe for Wire Tracer Toner Ethernet LAN Network Cable Collation, Telephone Line Tester &Continuity Checking, CT03

Tacklife Multifunctional Wire Tracker -- CT03 This instrument is a multi-functional handheld cable test tool. Applicable cable types are increased, functions are more, and the scope of application is wider. Wide range of applications, this line finder can be applied to machine room maintenance, circuit maintenance, telephone installation, routine line detection, broadband installation and indoor wiring. We have been working to solve all kinds of problems in your life. It is a necessary testing tool for telecommunication engineering, wiring engineering, routine network maintenance and other metal wire wiring works and maintenance work. Specifications: Operating temperature: 0 ~ 40 ° C, maximum relative humidity of 80% (non-condensing). Storage temperature: -10 ~ 50 ° C, maximum relative humidity of 80% (non-condensing, no battery) Altitude: <2000m Explosion-proof type: IP 40 Transmission signal distance: about 300m Battery: transmitter 6F22/9V x 1; receiver 6F22/9V x 1 The Main Functions Wire Tracking: RJ11, RJ45, and other metal wires can be found through the transmitter Line detection: Physical connection conditions such as open circuit, short circuit, wrong pair, and reverse connection of the network cable can be detected Continuity testing: Can detect the connectivity of the line PACKAGE CONTENT: Receiver x1 Transmitter x1 RJ11 converter interface x1 RJ45 converter interface x1 Headset x1 Carrying case x1 Manual x1 9V Batteries x2 Multifunction Wire Sequence Calibration a).Rotate the knob of the transmitter to the “NETWORK” position b) Plug one end of the network line into the RJ45 terminal of the transmitter and the other end into the terminal of the receiver RJ45. c) Press the “TEST” button on the transmitter to start the test. The LED Wire Sequence Light will indicate the result of the test. DC storage battery or positive and negative polarity detection For the detection of DC storage battery or positive and negative polarity of the line, only the transmitter can be used for detection.When the transmitter's battery is lower than the working voltage, the hunt function indicator “SCAN” on the transmitter will flash. When the indicator is flashing, please Replace the battery in time. Telephone line testing For the detection of various states of the telephone line in operation, only the transmitter can be detected. It can detect the status of the telephone line in operation (idle, ringing, off-hook) and discriminate TIP or RING line TONE Function Interpretation:(Only use transmitter to detect.) The operation method to determine TIP or RING line: Rotate to“TONE” function position--Connect the RJ11 interface-- Clip the red and black clips to the telephone line: I.“TONE”indicator is Red:the Red clip end is TIP line,the Black clip end is RING line; II.“TONE” indicator is Green:the Red clip end is RING line,the Black clip end is TIP line Determine the idle, ringing, and off-hook status of the telephone line during work: Rotate to“TONE” function position--Connect the RJ11 interface--The Red clip is clipped onto the RING line, and the Black clip is clipped onto the TIP line: I.“TONE”indicator is green:the telephone line is Idle; II.“TONE” indicator is not lit: the telephone line is Off-hook; III.“TONE”indicator is bright green or red: the telephone line is Ringing User-friendly design Transmission signal distance Long distance signal transmission, avoiding long distance running when repairing network cable.For example, between upstairs and downstairs. Volume adjustment The size and volume of the product are just right for one-handed grip when you are testing the line.And equipped with a pair of headphones, so that you can hear the signal more clearly in a noisy environment. User-friendly design Equipped with two LED lights, it is convenient for you to use when operating. And equipped with a pair of headphones,