WyreStorm EX-1UTP-IR-70-AMP HDBaseT Extender Set with Integrated 2.1 Audio Amplifer Kit (70m/230ft)

The WyreStorm EX-1UTP-IR-70-AMP is a single cable extender set, and then some.

Comprising of a Class B 70m HDBaseT transmitter with bidirectional control via IR and RS232 and the awardwinning WyreStorm HDBaseT Digital Amplifier as the receiving device, the EX-1UTP-IR-70-AMP enables a single HDMI source to be distributed over distance, with the flexibility of the AMP offering superior audio and control capabilities at the display zone.

Features:

• Transmits 1080p HD @60Hz and HD multichannel audio from a single HDMI source up to 70m/230ft under perfect conditions
• HDMI Input > HDBaseT Output, HDBaseT Input > HDBaseT / HDMI Output
• Combined HDBaseT Transmitter, Receiver, Repeater and Class D audio amplifier – all-in-one
• Discrete wide-band bidirectional IR control and fully addressable serial control of AMP via signal transmitted together within the HDMI signal over a single Cat5e/6cable to control source, display and AMP.
• RS232 Commands (Tx, Rx, Gnd) sent with HD Audio & Video contained within single Cat5e/6 
• Centralized RS232 for firmware updates or third party control with open source integration protocols available for market leading control systems
• 3:1 Audio switching/receiver – Audio from centralized source via HDBaseT Transmitter Audio Return Channel (ARC) or Local Audio Input via 3.5mm
• AMP may be used centrally with AV source, In-line close to speakers, wall mounted near data connections or locally at display location 
• Fully cascadable up to 7 times to further lengthen transmission and increase your distribution capabilities - 70m/230ft to AMP > a further 70m/230ft to additional AMP x 7 
• HDMI output for direct connection of HD display either in-line to each AMP connected or at the end of the run