Zgeer Bluetooth Wireless USB Laser Barcode Scanner

Description: -Wireless bluetooth barcode scanner provide an easy and fast method of data entry and storage for computerized information systems. -Support wireless & wired, in other words, bluetooth mode & handhold mode. -USB3.0 bluetooth receiver. -The wireless bluetooth barcode scanner we are offering now can be integrated into many computer systems. This wireless bluetooth barcode scanner has the advantages of easy operation and low error rate. It'll be a good partner with you. -Powerful decoding function, which realizes that the barcode scanner can read codes better and faster in many places, such as warehouse, supermarket, hotel,department, barcodes and so on. -This wireless bluetooth barcode scanner can be set easily when being used, and get rid of the trouble about complicated set of some barcode scanner in the current places, and be mastered easily by the user. Features: -Wireless bluetooth barcode scanner. -USB3.0 bluetooth receiver. -Support wireless & wired, in other words, bluetooth mode & handhold mode. -Supporting USB interface. -Support System:WinXP/7/8/8.1/10/Vista/Android/IOS. -Scan the bluetooth & handhold barcode mode on the manual, to switch wireless & wire working mode. -Desktop computer and bluetooth wireless working mode:Insert the bluetootn receiver to computer, install the driver,then open scanner to match. -Desktop computer and wired working mode:Insert the bluetootn receiver to computer, connect USB cable with scanner, then you can scan. -Laptop computer and bluetooth wireless working mode:If your computer has bluetooth, NO NEED to insert the bluetooth receiver, directly open scanner to match. -Cellphone and bluetooth wireless working mode:Open the scanner, start the bluetooth of cellphone, press the yellow button for 10 seconds, then match them. -Match scanner with other device:Start the bluetooth of device, press the yellow button for 10 seconds, then match them. -Charged by USB Cable.Use time:almost 7 days, Charge time:almost 30 minutes, Full charge indicator:Indicator is green. Notice before Use(Please Read It Carefully): -Open the bluetooth of your device to match the bluetooth barcode scanner,press the yellow button for 10 seconds, then match them. -Maintain a bevel between the wireless bluetooth barcode scanner and the barcode to make a best reading. -Do not keep the bluetooth scanner in 90°with the barcode,otherwise the scanner can’t read. -The bluetooth scanner must aim at the bacode and the beam must cover the whole barcode.If don’t , error maybe occur. Technical Specification: Power supply: 3.7V-DC5V Operating power: 250mw(operation mode);35mw(standby mode);500mw(max peak) Power Source: host external supply(lithium battery800mAh/3.7V) Operating current 50ma(operation mode);7ma(standby mode);100ma(max peak) Light source Visible laser 650nm ESD protection: 15KV Laser class: national laser safety standard class1 Depth of field: 3-9cm(0.1mm bar width);3.5-45cm(0.3mm bar width) Scanning width: 5cm-30cm Decoding speed: 300scans/sec Resolution: Minimum 0.1mm(4miles) Decoding capability: EAN-8,EAN-13,UPC-A,UPC-E,Code39,Code93,Code 128,EAN128,Codaber,Industoal2of5,Interleave2of5,Matrix2of5,MSI Prompt mode Buzzer,indicator light Interface Standard 3.0USB interface Trigger mode Manual trigger, continuous scanning Dimensions Approx: L*W*H:10cm*7cm*16cm Weight Approx: 130g(Excluding wire) Cable Standard: NC Interface Type: USB Material: ABS+PC+TPE Operating Temp: 0?-45? Storage Temp: 20?-60? Operating Humidity: 5%-95% Seismic capacity: By 1.5m free fall test Language: Support for multiple languages Color: Black Support System: WinXP/7/8/8.1/10/Vista/Android/IOS Use time: almost 7 days Charge time: almost 30 minutes Full charge indicator Indicator is green Package Content: -1x Wireless Bluetooth Barcode Scanner -1x USB Cable(almost135cm/4.43ft) -1x 3.0 Bluetooth Receiver -1x Paperclip -1x User Manual