Buy Tycon Power Systems Products online in United States

Tycon Power Systems TP-DCDC-1256GD-VHP very high power dc to dc converter with 56V 70W 4 pair gigabit dual 802.3at PoE inserter

The Gigabit compatible TP-DCDC1256GD-VHP is a special very high power DC to DC converters / POE inserter designed especially for Ubiquiti airFiber antenna systems and other systems which require high power passive POE such as Axis High Power POE PTZ security cameras. The unique POE inserter supplies 56VDC POE power on all 8 Ethernet wires (4 Pair). The wide input voltage range (10VDC to 60VDC) makes it universal in battery powered applications. The input and output is isolated so they work in a negative ground of positive ground system. It has two DC inputs for connecting 2 power sources, like a primary and backup power source. Also have various protections for surge, short circuit and overload. Comes complete with a DIN Rail mounting kit for mounting to a standard DIN rail. Specifications • Input Voltage +/- 10VDC to 60VDC • DC Input Connector Removeable Screw Type Compression Wire Terminal, 5 Pin (12 AWG Max) • POE Specification IEEE 802.3at (4 Pair) Compatible • Output Voltage (+/-2.5%) 56VDC • Data in & Data/POE Output Connector RJ45 (Shielded) • Output Current (max) 1.25A Total • Output Power (max) 70W Total • Self-Consumption Power 2W • Efficiency 80% Min (10VDC to 60VDC Input) • Line Regulation, Ripple, Noise 1% • Load Regulation 5% • EMC Standards FCC Class B EN55022 Class B • Safety Standards UL1950, CSA 22.2 & TUV EN60950 • Operating Temperature -40 to +70°C (-40 to +158°F) • Operating Humidity (RH) 5% - 90% • Storage Temperature -40 to +85°C (-40 to +185°F) • Dimensions (LxWxH) 90 x 118 x 40mm (3.5 x 4.6 x 1.57”) • Weight 335g (11.8oz)

Tycon Systems TP-POE-24G 24W Gigabit POE Power Inserter - US Power Cord44; 24V

Tycon Systems TP-POE-24G 24W Gigabit POE Power Inserter - US Power Cord44; 24V Item Condition: New Brand: tycon power systems Manufacturer: Tycon Power Systems Item model number: TP-POE-24G Product Information - The TP-POE-24G Gigabit Power Over Ethernet Power Source/Inserter offered by Tycon Power Systems are quality power sources for years of reliable operation even in the toughest conditions - They accept data-in to a shielded RJ45 Jack and provide data-out and power on the shielded RJ45 output jack - The POE inserters have built in Ethernet surge protection which eliminates the need for a standalone Ethernet surge protector. - The TP-POE-24G are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated 24VDC at the output. - Remotely Power Equipment thru CAT5 Cable up to 100m. The TP-POE-24G Gigabit Power Over Ethernet Power Source/Inserter offered by Tycon Power Systems are quality power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4, 5(V+) and 7, 8(V-). The Ethernet spec supports distances up to 100m (328 feet). The POE inserters have built in Ethernet surge protection which eliminates the need for a standalone Ethernet surge protector. The TP-POE-24G are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated 24VDC at the output. They have various protections for surge, short circuit and overload. Output is 24VDC with load regulation within 5%.

Tycon Power TP-POE-HP-56G - 56V 100W High Power Gigabit Passive POE

The TP-POE-HP-56G Power Over Ethernet Power Sources offered by Tycon Power Systems are quality Gigabit midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on all 8 Ethernet wires. The Ethernet spec supports distances up to 100m (328 feet). The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated 56VDC at the output. They have various protections for surge short circuit overload and overvoltage. They have total power output up to 100W.

Tycon Systems44; Inc Surge Protector44; 5ka Surge - TP-ESP-1000-POE

Tycon Systems44; Inc Surge Protector44; 5ka Surge - TP-ESP-1000-POE Item Condition: New Brand: tycon power systems Manufacturer: Tycon Power Systems Item model number: TP-ESP-1000-POE Color: Black Size: 1 Product Information - Gigabit Ethernet PoE Lightning/Surge Supressor Protector 70V Clamping - CAT5/6 Compatible. All 8 pins protected - Clamp Voltage 70V, 5KA Max Discharge Current - Common and Differential Mode, Applications: Wireless Access Points and Client Devices; IP Phone and Security Camera Systems; Industrial Control Systems Network Lightning/Surge Protector, 1000Mbps Data Rate, LAN/POE 7.5V /70V Clamp Voltage, 5KA Surge

Tycon Systems TP-DCDC-1248 48V POE Out 24W DC to DC Converter and POE Inserter

Tycon Systems TP-DCDC-1248 48V POE Out 24W DC to DC Converter and POE Inserter Item Condition: New Brand: tycon power systems Manufacturer: Tycon Power Systems Item model number: TP-DCDC-1248. Color: Black Size: 1 Product Information - The TP-DCDC-1248 DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. - They have an integrated POE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC. - They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. - Various protections for surge, short circuit and overload. The units have power output of 24W. - Applications: 2V / 24V Battery Systems; Wireless Access Points and Client Devices; IP Phone and Security Camera Systems 9-36VDC IN 48VDC OUT 18-24W DC to DC Converter and POE inserter

Tycon Power TP-POE-HP-24 24V 36W High Power POE Power Source

The TP-POE Passive Power Over Ethernet Power Sources offered by Tycon Power Systems are quality power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the "R" model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).The TP-POE are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 100W. They are available in 18V, 24V and 48V DC Output with load regulation within 5%. The CI model has an special current sense LED which changes color when a POE device is plugged into the CAT5 cable. If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used. Features • Remotely Power Equipment thru CAT5 Cable up to 100m • Built in Ethernet Surge Protection • Autoranging Switching Power Supply • Short Circuit, Over Current and Over Voltage Protection • Medium Power and High Power Models Available • Various DC Voltage Outputs Available • High Temperature Operation • Compact size • Floor / Desktop / Wall Mount • CE / FCC / UL / CB Approved Applications • Wireless Access Points and Client Devices • IP Phone and Security Camera Systems

Tycon Power POE-INJ-LED-S POE Inserter Power POE power CAT5 ethernet cable

The POE-INJ-LED-S is a low cost Power Over Ethernet (POE) Inserter to insert POE power to a CAT5 ethernet data cable on the unused ethernet pins 4, 5(+) and 7, 8(-).

Tycon Power TP-MS308 - Mid Span High Power 16.8W POE Injector - 8 port

The TP-MS3xx series of rack mount mid span POE power sources are used for supplying POE and data to multiple devices from a central location such as an operations room. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is fully IEEE802.3af compliant. The included PC software allows for configuration of the individual ports and for displaying port status. Connecting to a PC is easy with the included RS232 cable. Ports can be configured for forced POE output (Passive POE) or IEE802.3af detection. POE DC Voltage (48V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per rack mount unit is 400W. The individual outputs are overload and short circuit protected. Package Contents: TP-MS308 PoE Injector US Power Cord Product Type: PoE Injector Product Type: PoE Injector Compatibility: Wireless Access Points Client Devices IP Phones Security Camera Systems Input Voltage: 63 V DC Input Voltage: 42 V DC Manufacturer Part Number: TP-MS308 Limited Warranty: 2 Year Weight (Approximate): 7.05 lb Network Technology: Ethernet Certifications & Standards: IEEE 802.3af IEEE802.3 IEEE802.3u IEEE802.3ab Length: 16.9 Manufacturer: Tycon Power Systems Product Model: TP-MS308 Product Name: TP-MS308 PoE Injector Brand Name: Tycon Power Output Ports: 8 Brand Name: Tycon Power Input Ports: 8 PoE Output Ports: 8 Ethernet Height: 1.7 Width: 11.4 Maximum Output Power: 16.80 W

Tycon Power PSHP-24-180-DIN Power Supply With 4 Pin Mini Din Connector & NA AC Cord - 24V

The PSHP Series high efficiency auto ranging switching power supplies have an impressive capacity up to 180W. They are designed for long life operation with an MTBF exceeding 40 000 hours. Supplies have CE FCC comply with RoHS requirements. The Std versions come with a 5.52.1 mm. DC barrel Connector. The DIN versions come with a locking 4 Pin Mini Power DIN connector.Features. High Power and rugged design. High Efficiency Design >85. Short circuit over-voltage over-current protection. Detachable AC power cordSpecifications. Input Operating Range - 90-264VAC 47-63Hz. Input In-rush Current - 60A Max. Input Current - 1.5A Max. Ripple Noise - 1 5. Efficiency - 85 Minimum. Dielectric Strength - 1800V rms 50Hz 1 sec 10mA Max. Protection - Short Circuit Overshoot 10 Over-Voltage 4V Over-Current 125. Operating Temp - 20C to 50C. Operating Humidity - 5 to 90 non- condensing. Storage Temp - 40C to 85C. Case Size - 6.9 x 2.6 x 1.7 in.. Output Voltage - 24 VDC - 2. Continuous Load Current - 3.2 A. MTBF - 40 000 Hours. DC Plug Cable Length - 4 Pin Mini Power DIN 1.2m

Tycon Power Systems - TP-SW5G-24 - Tycon Power Systems TP-SW5G-24 IEEE802.3af PoE accepts 10-36VDC 35W

MAIN OVERVIEW FEATURES: Total Number of Network Ports: 5Uplink Port: YesModular: NoPort/Expansion Slot Details: 4 x Gigabit Ethernet Network1 x Gigabit Ethernet UplinkMedia Type Supported: Twisted PairEthernet Technology: Gigabit EthernetNetwork Technology: 10/100/1000Base-TLayer Supported: 2PoE (RJ-45) Port: YesPower Source: PoEForm Factor: Rail-mountableHeight: 1.6"W idth: 4.6"D epth: 6.3"W eight (Approximate): 13.51 ozPackage Contents: POE 5 Port SwitchDIN Rail mountsEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: 2 Year

Tycon Power Systems - TP-SW5G-24HP - 5 Port High Power (140W Total) PoE 10/100/1000BaseT Switch, 802.3at/af 48V PoE Out,

TP-SW5 Series - 5 Port PoE SwitchThe SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port. The switch comes in 5 models: TP-SW5G-D: /at Compliant 48VDC 10/100/1000MB PoE Switch. Switch accepts 48VDC power via a wire terminal connector on the back of the Switch or via 48VDC PoE into the 802.3 af/at compliant uplink port (90W max). 35W per -SW5G-24 (HP): /at Compliant 48VDC 10/100/1000MB PoE Switch. Switch accepts 12-36VDC power via a wire terminal connector on the back of the Switch or via 48VDC PoE into the 802.3 af/at compliant uplink port (90W max). Perfect for remote solar/battery systems. 35W per port. 70W Max Total, HP Ver 140W -SW5G-MULTI: Universal Multiple Voltage (MultiVolt[tm]) 10/100/1000MB PoE Switch. Switch accepts up to 4 different voltages (12-57VDC) so user can power both 48V PoE and 24V PoE devices from the same switch. The port can individually be set to Data Only by disconnecting the voltage input to that specific port. 1A per -SW5G-NC: Universal Voltage 10/100/1000MB PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive PoE input on port 5. 1A per -SSW5-NC: Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4''x5''x 1.5 ''. 2A per the universal voltage models (``-NC'') the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote Power sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting. Ethernet Standard IEEE 802.3 /IEEE 802.3 u Ports 1 data/PoE input and 4 data/PoE, automatic crossover and polarity Transmission Speed 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation Switch Technology Store and Forward Protocol CSMA/CD Flow Control IEEE 802.3 x(full-duplex), Back Pressure(half-duplex) Data Transmission Rate 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT Address Table 1K MAC, self-learning Connections Shielded RJ45 POE Output Ports Port 1-4, auto power management Pin assignment: TX(1, 2), RX(3, 6), V+(4, 5), V-(7, 8) Maximum POE Power HP with 24V Input 140W Total HP with 12V Input 70W Total POE Auto Detection IEEE 802.3 af, 802.3 at POE Protection Over Temperature, Over Current, Over/Under Voltage Data Surge Protection IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20? s) LED’s Link (Green On) Activity (Green Blinking ) PoE Detect (Yellow On) PoE Detect Error (Yellow Blinking) Power On (Green On) Power On Alarm (Red On) DC Power Input 24VDC (12V to 36V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts PoE power input on Port 5 Self Consumption < 4 Watts Operating Temp -40 to +70°C (-40 to 158°F) Operating Humidity (RH) 5% - 90% (non condensing) Storage Temperature -55 to +85°C (-67 to +185°F) Dimensions (LxWxH) 159 x 118 x 40mm ( 6.3 x 4.6 x 1.6 ”) (metal housing) Weight 383g ( 13.5 oz) Warranty 3 Years

Tycon Power Systems - TP-DCDC-4856GD-VHP - Tycon Power (TP-DCDC-4856GD-VHP) 36-72VDC In, 56VDC 70W 2 Ch 802.3at Out DCDC

The TP-DCDC-4856GD-VHP is a special very high power DC to DC converter / POE inserter designed and qualified for use with Axis Q60 Series outdoor PTZ security cameras. The DCDC converter supplies 35W per POE channel. One POE channel is using pins 4, 5, 7, 8 and the other POE channel utilizes pins 1, 2, 3, 6. By splitting the power onto separate POE channels, the device can achieve 70W total supplied power to the end device. The TP-DCDC-4856GD-VHP has separate LED indicators for indicating which 802.3 at channel is being used by the client. The RIGHT LED indicates POE Channel 1 and the LEFT LED indicates POE Channel 2. The TP-DCDC-4856GD-VHP has been qualified by Axis to be used with their Q60 series of PTZ cameras. The unit can be used with any 802.3 at device as it will supply 35W to any 802.3 at POE channel detected. If two channels are detected on the client then 70W power will be supplied. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated. Product Type: PoE Injector Product Type: PoE Injector Compatibility: Axis Q6035-E Outdoor Cameras Input Voltage: 72 V DC Manufacturer Part Number: TP-DCDC-4856GD-VHP Limited Warranty: 1 Year Certifications & Standards: 802.3 at FCC Class B EN55022 Class B UL1950 CSA 22.2 Form Factor: External Manufacturer: Tycon Power Systems Product Name: (TP-DCDC-4856GD-VHP) 36-72VDC In, 56VDC 70W 2 Ch 802.3 at Out DCDC Protection Type: Over Voltage Protection Type: Over Current Protection Type: Short Circuit Brand Name: Tycon Power Output Ports: 1 x Gigabit Ethernet Brand Name: Tycon Power Input Ports: 1 Gigabit Ethernet Output Ports: 1 Gigabit Ethernet Height: 1.5 Width: 3 Depth: 4.9 Environmentally Friendly: Yes Environmental Certification: TUV Maximum Output Power: 70 W Maximum Output Voltage: 56 V DC

Tycon Power POE 5 Port Switch

The SW5 Series Power Over Ethernet (POE) switches offered by Tycon Power Systems are fully automatic high speed 5 port Ethernet switches with up to 2A of POE power per port. The switch comes in 4 models: TP-SW5G-D: IEEE 802.3 af/at Compliant 48VDC 10/100/1000MB POE Switch. Switch accepts 48VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3 af/at compliant uplink port (90W max). 35W per port. TP-SW5G-24: IEEE 802.3 af/at Compliant 48VDC 10/100/1000MB POE Switch. Switch accepts 12-36VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3 af/at compliant uplink port (90W max). Perfect for remote solar/battery systems. 35W per port. TP-SW5G-NC: Universal Voltage 10/100/1000MB POE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive POE input on port 5. 1A per port. TP-SSW5-NC: Universal Voltage 10/100 POE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4x5x 1.5. 2A per port. On the universal voltage models (-NC) the POE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the POE switch and the remote device. The Switches accept connections for up to two power supplies if additional power is required or if a backup power source is desired. Tycon Power Systems sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting. Package Contents: POE 5 Port Switch DIN Rail Mounting Product Type: Ethernet Switch Layer Supported: 2 Product Type: Ethernet Switch Manufacturer Part Number: TP-SW5G-D Limited Warranty: 2 Year Layer Supported: 2 Weight (Approximate): 11.22 oz Form Factor: Rail-mountable Network Technology: 10/100/1000Base-TX Form Factor: Rail-mountable Manufacturer: Tycon Power Systems Product Model: TP-SW5G-D Product Name: POE 5 Port Switch Network Technology: 10/100/1000Base-TX Brand Name: Tycon Power Product Series: TP-SW5 Brand Name: Tycon Power Height: 1.6 Width: 6.3 Depth: 4.6 Manageable: Yes Ethernet Technology: Gigabit Ethernet Product Family: TP-SW5 Stack Port: No Media Type Supported: Twisted Pair Total Number of Network Ports: 5 Port/Expansion Slot Details: Gigabit Ethernet Redundant Power Supply Supported: No Manageable: Yes Ethernet Technology: Gigabit Ethernet Modular: No Uplink Port: Yes Stack Port: No Media Type Supported: Twisted Pair Total Number of Network Ports: 5 Port/Expansion Slot Details: 5 x Gigabit Ethernet Network Redundant Power Supply Supported: No

Tycon Power TP-POE-24 POE Injector

The TP-POE Power Over Ethernet Power Sources offered by Tycon Power Systems are quality midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the "R" model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).There are models available that support 802.3af and 802.3at as well as models that support Gigabit Ethernet. The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 50W. They are available in 18V, 24V and 48-56V DC Output with load regulation within 5%. The CI model has a special current sense LED which changes color when a POE device is plugged onto the CAT5 cable.Features* Product Type: PoE Injector * Brand Name: Tycon Power * Network Technology: Ethernet * Product Type: PoE Injector * Green Compliant: Yes * Green Compliance Certificate/Authority: RoHS * Maximum Output Power: 19 W * Maximum Output Voltage: 24 V DC * Height: 1.4" * Width: 3" * Certifications & Standards: UL1950 CSA 22.2 TUV EN60950 FCC Class B EN55022 Class B * Brand Name: Tycon Power * Input Ports: Ethernet * Output Ports: Ethernet * Compatibility: Wireless Access Points Client Devices IP Phones Security Camera Systems * Length: 3.3" * Product Model: TP-POE-24 * Product Name: TP-POE-24 POE Injector * Input Voltage: 90 V AC * Input Voltage: 264 V AC * Package Contents: TP-POE-24 POE Injector US Power Cord * Limited Warranty: 1 Year * Weight (Approximate): 5.29 oz

Tycon Power PoE+ managed switch TP-SW4G-2SFP with 6 ports

TP-SWxG-2SFP - Managed Industrial PoE+ SwitchThe TP-SWxG-2SFP Power over Ethernet (PoE) 6 and 10 port Gigabit switches offered by Tycon are fully automatic high speed Layer 2+ Ethernet manageable switches. The 6 port model has 4 PoE + 2 SFP ports and the 10 port model has 8 PoE + 2 SFP ports. The PoE ports are Mode A (pins +1, 2 -3, 6) type and are manageable via the user interface. They can be set to PoE, PoE+ or OFF. Default is PoE+. The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface (CLI), TELNET, SSH or L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE+ management are just some of the features available with this Industrial PoE Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also switches are compliant with 802.3 az Energy Efficient Ethernet task force specs. The switch automatically powers down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save switches can be powered by 12VDC to 36VDC if no PoE output is required or powered from 48VDC to 57VDC if PoE is units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 20km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial * Industrial Strength (-40C to +80C Operating Temperature)* 4 PoE+ or 8 PoE+... and 2 fiber (SFP) Ports* 10/100/1000 Gigabit Compatible* Manageable via Console Port or IP* Surge Protected Voltage and Ethernet Inputs* Integrated DIN Rail Mount

Tycon Power Systems ENC-ST-23x14x12 Weatherproof Steel Enclosure, 23x14x12in

The ENC-ST-23x14x12 Powder Coat Painted Outdoor Enclosure has a locking hinged lid for security and convenient access to the generous 23 x 14 x 12in interior space. Features Weatherproof Nema 4X / IP65, UV resistant, outdoor enclosures Choice of Die Cast 10x8x3” or Polycarbonate 14x10x5” or Steel 23x14x12 Gasket sealed Weatherproof cable feedthru Applications Wireless Base Stations and Clients Surveillance Cameras Wireless Bridge and Repeaters Remote Sensors Outdoor Utilities Solar nd Wind Power The ENC series outdoor enclosures are designed for applications that require a sturdy, weatherproof enclosure to house various electronics. They have gasket seals and are made from UV resistant materials for long service life. They can be wall or pole mounted. The ENC-PL and ENC-ST enclosures have lockable closures to prevent unauthorized access. Features include a hinged cover for easy access and weatherproof feedthru’s for cables and wiring. The ENC-DC comes with an RJ45 feedthru which allows passing of an RJ45 connector to make the entire enclosure yield replaceable. It also has two cutouts for an N Female connector for attaching external antennas. The ENC-PL has 3 weatherproof universal cable feedthru’s. The ENC-ST has two cutouts for RJ45 Feedthru and two for N female connectors. The ENC-St also comes with a removable battery shelf. ** This is an oversized item. Shipping discount programs don't apply. Additional charges and specialized shipping may be required. **

Tycon Power UPS-PL1224-36 - UPSPro, 30W 430VA Polycarbonate Enclosure

The UPSPro? series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries.

Tycon Power TP-BC48-300 - 48VDC 300W WET/GEL Smart Battery Charger

Tycon Power TP-BC48-300 High Power Battery Charge Controller Total Power Available: 300W Nominal Battery Voltage: 48VDC Load Output Min. Current: 1A Load Output Max Current: 6A The TP-BC series of smart battery chargers provide up to 300W of total power. Part of the power is allocated to the regulated load output and remaining power is allocated to battery charging. The smart battery charger is compatible with GEL/AGM type sealed lead acid batteries and also WET type lead acid batteries (like car batteries). The load output is regulated so that output voltage does not exceed 12.5VDC on the 12V model and 24.5VDC on the 24V model and 48.5VDC on the 48V model. Also the load output will turn off when the battery voltage is low to prevent over discharge of the batteries which can shorten the useable life of the batteries. Load output will turn back on automatically when batteries have sufficient charge. The TP-BC series provides seamless switchover from AC power to battery power so there is no interruption which could reset a user’s electronics. The charger auto-recovers from a power failure so no user action is necessary. The charger has various protections for short circuit, overvoltage protection, overcurrent and reverse battery. It operates over a wide temperature range making it suitable for industrial applications. The battery charger will not work without a battery connected. A solar panel and solar charge controller can be added to the system if supplemental power from solar is desired. A Wind Turbine can be added if wind power is available. There are various LEDS on the front panel to see status-at-a-glance of the Load Output, Charging Condition and AC Power Condition.

Tycon Power TP-SW5GNC-OUT48 - 5 Port 48VDC Passive POE Gigabit Outdoor Switch

The TP-SW5GNC-OUT48 outdoor passive POE switch is designed for operation in harsh outdoor environments. The switch can be powered via a wire terminal connector or over POE into the uplink port. This allows the switch to be mounted where it is needed and up to 100m from a power source. By using the switch as a repeater, the useable Cat5 cable distance between power source and user POE devices can be doubled to 200m. The switch is a 5 port Gigabit model with 48VDC Passive POE. The model can be changed in the field just by changing the power supply voltage which powers the switch. The switches are supplied with 48VDC 150W AC to DC power supplies with Gigabit POE inserters. The switch is an unmanaged layer 2 switch.

Tycon Power TPSK12-30W 12V 30W Solar Kit with Panel Pole Mount Controller Cable

The TPSK series of solar panel kits come complete with high efficiency multicrystalline solar panel, side of pole/wall mounts and outdoor rated 12AWG cable. They are ready for quick connection to Tycon Power Systems outdoor Solar Ready™ UPSPro™ Systems or any other application requiring solar power. The panels use only the best silicon cells from Germany to provide excellent low light performance and long life (25years). The rugged aluminum frame and high transparency, low iron, tempered glass withstands high wind, hail and snow loading. The mounts are heavy duty aluminum with stainless steel hardware. They are a simplified design that makes them easy to install, saving precious installer time. The mounts are designed for pole mounting but can also be wall mounted. They provide quick tilt adjustment for positioning the panel to proper sun angles for summer and winter sun.

Tycon Power UPS-PL2424HP-9 - UPS Pro 60W 200VA Polycarbonate Enclosure 24V 9Ah

The UPS Pro? series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

Tycon Power POE-SPLT-4824AC - 48VDC 802.3at Input, 24VAC @ 2.9A 70W Output

The POE-SPLT Active splitters are unique Power Over Ethernet adapters which converts a DC POE input voltage to AC or DC regulated output voltages.The output is provided on a standard 5.5mm/2.1mm barrel connector on a 14” cable or in the case of the 70W unit, on a wire terminal connector.Ethernet speeds of 10/100MB and 10/100/1000MB are available. Inputs and outputs are isolated. They have various protections for surge, short circuit, overload and overvoltage.

Tycon Power TP-SW5G-MULTI 5 port multi-volt gbit passive PoE switch 12-56V

The SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port. Universal Multiple Voltage (MultiVolt™) 10/100/1000MB PoE Switch. Switch accepts up to 4 different voltages (12-57VDC) so user can power both 48V PoE and 24V PoE devices from the same switch. The port can individually be set to Data Only by disconnecting the voltage input to that specific port. 1A per port. Specifications • Ports 1 data/PoE input and 4 data/PoE, automatic crossover and polarity • High Power 10/100 and 1000Mb (“G”) PoE Switch • Protocol CSMA/CD • Self Consumption < 3 Watts • Maximum POE Power 1A per port • POE Auto Detection Passive PoE • DC Power Input 12V to 57VDC, Reverse Polarity Protected. NC Accepts PoE power input on Port 5 • Operating Temp -20 to +75°C (-4 to 167°F) • Dimensions (LxWxH) 159 x 118 x 40mm ( 6.3 x 4.6 x 1.6 ”) • Weight 318g (11oz) • Remotely Power Equipment thru CAT5 Cable up to 100m • Up to 2A per Port • Built-in Surge Protection • Automatic MDI/MDI-X Crossover • Automatic Speed and Duplex Sensing • Compact Size • High Temperature Operation • CE and FCC Certification

Tycon Systems TP-SW5G-NC 5 Port High Power Passive POE Gigabit Switch - 12-56V

The SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port.?? Universal Voltage 10/100/1000MB PoE Switch. Switch accepts universal voltage (12- 57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive PoE input on port 5. 1A per port. On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device. ApplicationsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsProduct informationTechnical DetailsManufacturer & lrm; Tycon Power SystemsPart Number & lrm; TP-SW5G-NCItem Weight & lrm; 11.2 ouncesProduct Dimensions & lrm; 4.65 x 6.26 x 1.57 inchesItem model number & lrm; TP-SW5G-NCIs Discontinued By Manufacturer & lrm; NoVoltage & lrm; 12 VoltsWattage & lrm; 3.00I tem Package Quantity & lrm; 1Batteries Included? & lrm; NoBatteries Required? & lrm; NoAdditional InformationASINB00BNHZ93WCustomer Reviews 5.0 out of 5 stars1 rating 5.0 out of 5 starsBest Sellers Rank#3, 240 in Computer Networking SwitchesDate First AvailableMarch 1, 2013Warranty & SupportProduct Warranty: For warranty information about this product, please click here FeedbackWould you like to tell us about a lower price? VideosPage 1 of 1Start OverPage 1 of 1Previous pageVideos for related products 16:43 Click to play videoMultigig Networking on a Budget - 2.5 and 10 gig options! Lon. TVVideos for related products 3:20 Click to play videoIndustrial DIN Rail Security & Networking POE+ Switch Unboxing-| POE-SW802-DIN PoE DepotVideos for related products 1:56 Click to play videoIntroducing NETGEAR 16-Port PoE+ Gig Ethernet Plus Switches Netgear IncVideos for related products 1:25 Click to play videoIntroducing NETGEAR Business Unmanaged Switches Netgear IncVideos for related products 2:18 Click to play videoNETGEAR ProSAFE 10-Gigabit Ethernet Switches | XS708Ev2 & XS716E NETGEAR Videos for related products 1:38 Click to play videoNETGEAR ProSAFE Gigabit Web Managed Click Switches NETGEAR Videos for related products 1:28 Click to play video300 Series Switches Demo Merchant VideoVideos for related products 2:51 Click to play videoIndustrial Switches Video TREN DnetVideos for related products 2:18 Click to play videoLearn About the New NETGEAR Smart Plus Switches GUI Netgear IncVideos for related products 1:28 Click to play videoHow to Setup Link Aggregation on the Nighthawk X10 Router and S8000 Switch | NETGEAR NETGEAR Next pageUpload your video Customer Review: Multigig Networking on a Budget - 2.5 and 10 gig options! See full review Lon. TVOnsite Associates ProgramAmazon Influencer Important informationBulb Voltage12 voltsProducts related to this itemSponsoredHide feedbackPage 1 of 1Start overPage 1 of 1Previous page of related Sponsored Products Feedback

Tycon Power Systems UPS-PL1248-18 solar ready backup system with 12V 17Ah capacity battery and 48V PoE

The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable using Power Over Ethernet (PoE) with a high power PoE Supply/Inserter (included). Inside, the system has a RJ45 connector as DATA/PoE input and an RJ45 connector as a DATA/PoE output which gets connected to the customers POE device. There is also an unregulated 12VDC output on a wire terminal connection. The 12VDC output is capable of 18W and the PoE output is capable of 30W for a total of 48W. The integrated controllers are Solar Ready and can be used with an external 12VDC solar panel up to 140W in addition to grid power supplied via PoE. Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the PoE input and/or solar power. The solar power takes precedence over grid power when available. Features include a battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas. There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. - Specifications • POE Output Voltages Available (DC) 48V • Available Capacities (Amp Hours) 17Ah • Total Output Power 30W • Maximum POE Input Voltage 57V • Battery Voltage (DC) 12V • Battery Type Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM) • Battery Life 5 Years • Controller Type Dual Input Solar/POE, PWM, 12V 8A Max Solar Panel Size 135W • Overcharge Protection 14.4V • Over-discharge protection 11.0V • Over-discharge recovery voltage 12.0V • Controller Self Consumption < 0.5W • Charging POE Power Supply 120/220VAC In; 24VDC 60W Out • Enclosure Type Polycarbonate • Enclosure External Size 17.5 x 12.5 x 6” (445 x 318 x 152mm) • Enclosure Internal Size 14 x 10 x 5” (356 x 254 x 127mm) • Space available for Customer Electronics 3 x 5 x 3” (76 x 127 x 76mm) • Operating Temperature -30°C to +60°C (-22°F to 140°F) • System Weight (without batteries) 4lb ( 1.8 kg) • Battery Weight (each) 5.5 lb ( 2.5 kg) • Manufacturer Warranty 3 Years

Tycon Power Systems TP-MS316 Midspan Gigabit PoE Injector with 16 Ports 802.3af/Passive and AC/DC Input

The TP-MS3xx series of rack mount mid span PoE power sources are used for supplying PoE and data to multiple devices from a central location such as an operations room. The PoE devices feature a separate data-in port coupled with a data out/PoE port. The PoE function is fully IEEE802.3af compliant and supports Gigabit Ethernet. The included PC software allows for configuration of the individual ports and for displaying port status through the RJ45 management port or network. Ports can be enabled/disabled and configured for forced PoE output (Passive PoE) or IEE802.3af detection. PoE DC Voltage (48V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per rack mount unit is 400W. The individual outputs are overload and short circuit protected. The 1U rack mounting accommodates 19" or 23" racks with included brackets.

Tycon Wireless Outdoor Point to Point Bridge EZBR-0214+ with Two 2.4GHz 14dBi MIMO Antennas and Two PoE Power inserters

Tycon Wireless Outdoor Point to Point Bridge EZBR-0214+ with Two 2.4GH z 14dBi MIMO Antennas and Two PoE Power inserters Item Condition: New Brand: tycon power systems Item model number: EZBR-0214+ Product Information - The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GH z unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec - It complies with the 802.11 g and n standards to insure interoperability - The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight - It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access - Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GH z unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec. It complies with the 802.11 g and n standards to insure interoperability. The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites. The EZ-Bridge LT+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11 gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Cat5e rated POE (Power Over Ethernet) power inserters and 24VDC auto-ranging power supplies. Power over Ethernet: Antennas can be mounted up to 100meter (300’) from the power inserter. No driver needed. Pre-configured at the factory for automatic peer to peer communications. Customer needs to supply CAT5 cabling between the power inserter and the antenna and between the power inserter and his computer, router or switch.

Tycon (TP-SCPOE-2448-HP) POE/Solar 24V /48V POE 60W Battery Charge Control

TP-SCPOE-2448-HP - PoE /Solar Charge ControllersTycon Solar unique PoE/Solar charge controllers have dual inputs to charge batteries from a PoE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar panel input takes priority so that when the sun is shining the grid power usage is minimized. They have a built in PoE inserter regulated voltage output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over have five LED indicators to give a quick visual status if current is being supplied by a PoE source or solar panel, if battery is charging, if load output is turned on, and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 5 screw terminals for wire size up to 10AWG. PoE Input and Output is via 2 RJ45 shielded connectors. There is a secondary output connector on the back with 5 screw terminals for connecting other electronics to the controller using up to 10AWG wire. The 48VDC passive POE output and 24VDC secondary output are regulated to prevent damage to devices due to overvoltage. The controllers are externally fused with a standard replaceable TP-SCPOE-2448-HP can provide up to 60W total power for powering various * Dual Input - Charges 24V Batteries from Solar Panel and / or Passive PoE* Supports up to 60W Total Device Load* Regulated 48VDC 30W Passive PoE output* Regulated 24VDC Secondary Output Voltage* Compact and high temperature operation* Low self consumption < 0.5W

Tycon (TP-DCDC-4848-HP) 36-72VDC In, 56VDC Out 30W DC to DC

The TP-DCDC-4848-HP DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Regulated and isolated Power Over Ethernet voltage from a 48V battery system. They have an integrated POE injector to apply the regulated 56VDC to the CAT5 Ethernet cable. The input voltage must be between 36VDC and 72VDC.They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack.They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-).They have various protections for surge, short circuit and overload. The units have power output of 30W.

Tycon Systems EZBR-0214HD- 2.4GHz Industrial Strength Point To Point Bridge System

The EZ-BridgeLT-HD is a Industrial Strength high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 15 Mbsec. It complies with the 802.11b and g standards to insure interoperability. The EZ-BridgeLT-HD comes with two 75 ft. shielded outdoor rated CMX CAT5 cable assemblies and POE Inserters with built in surge protection on the Ethernet data and power lines. The EZ-Bridge creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings internet access sharing remote video surveillance or remote network access. Multiple EZ-Bridge units can be connected in a mesh configuration to allow interconnecting more than two sites. Using the EZ-GO Wireless Network Expansion Units you can create a network between an odd number of buildings like 3 or 5 sites. With its password verification MAC address authentication SSID suppression and advanced WPA2 encryption the system provides the best wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer.

Tycon (TP-DCDC-2448-HP) 18-36VDC In, 56VDC Out 30W DC to DC

MAIN OVERVIEW FEATURES: Input Voltage: 24 V DCMaximum Output Voltage: 56 V DCMaximum Output Power: 30 WInput Ports: 10/100/1000Base-TOutput Ports: 10/100/1000Base-THeight: 1.5"W idth: 3"Length: 4.9"W eight (Approximate): 10.58 ozCompatibility: 12V / 24V / 48V Battery SystemsWireless Access PointsClient DevicesIP PhoneSecurity Camera SystemsCertifications & Standards: FCC Class BEN55022 Class BUL1950CSA 22.2TUV EN60950Limited Warranty: 1 Year

Tycon (TP-DCDC-4824-HP) 36-72VDC In, 24VDC Out 30W DC to DC

MAIN OVERVIEW FEATURES: Input Voltage: 48 V DCMaximum Output Voltage: 24 V DCMaximum Output Power: 30 WInput Ports: 10/100/1000Base-TOutput Ports: 10/100/1000Base-THeight: 1.5"W idth: 3"Length: 4.9"W eight (Approximate): 10.58 ozCompatibility: 12V / 24V / 48V Battery SystemsWireless Access PointsClient DevicesIP PhoneSecurity Camera SystemsCertifications & Standards: FCC Class BEN55022 Class BUL1950CSA 22.2TUV EN60950Limited Warranty: 1 Year

Tycon TP-POE-HP-48DX2 120/240VAC In, Dual 56VDC 802.3af/at Out 50W

The TP-POE-HP-48DX2 are unique high power PoE injectors with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single PoE injector. The data path between the units is handled by the injector so no PoE switch is required. Power Output is 50W total or 25W per port They have a standard removeable power cord input (North American Power Cord Included). They have various protections for short circuit, overload and surges caused by ESD or lightning. The built-in surge protection protects sensitive connected devices from damage due to surges on data and PoE lines. All 8 wires are protected. The input voltage and output voltage are isolated to avoid any grounding or negative voltage issues.

Tycon Systems POE-MSPLT-4809 POE Splitter - 9V DC 12W

The line of dynamic splitters are compact Power over Ethernet adapters which splits the Data and PoE power onto separate output connectors and converts the active PoE IEEE802.3afat input into a regulated DC output voltage. The DC output is provided on a standard 5.5 mm.2.1 mm. barrel connector and the Data output is provided on standard RJ45 network connector each on a dedicated 6 in. cable. In addition to being compatible with 10100MB Ethernet speeds inputs and outputs are isolated and the devices include protections for short circuit and overload.Features. Very Compact Size. Converts an Active PoE Input to a DC output. Output Power Up To 15W. Short Circuit Over Current Protection Specifications. Output Voltage - 9VDC. Output Current - 1.34A. Output Power - 12W. DC Output Connector - 5.5 mm. 2.1 mm. Barrel Connector. Output Cable Length - 6 in.. Load Reg Noise - 5. Line Reg Ripple - 1. PoE Input RJ45 - IEEE 802.3afat or Passive PoE 36 - 60VDC. Ethernet Speed - 10100MB. Efficiency - 75 Min. EMC Standards - FCC Class B NE55022 Class B. Isolation Voltage - 1500VDC. Isolation Resistance - 100m Ohms Minimum.

Tycon (POE-MSPLT-USB) Mini Splitter 802.3af/at or passive48 POE In, USB 15W Out

POE-MSPLT-USB is a splitter to power USB powered devices like smartphones and tablets using PoE. It has an 802.3af/at or 48VDC Passive PoE input. The 15W PoE output is compatible with a variety of newer PoE powered devices that need a higher power USB source. These splitters are the perfect solution to provide USB power from any PoE switch or active PoE source. It can also be powered via passive 48VDC PoE. Wide -25 to +50C temperature range enables outdoor applications when mounted in weatherproof enclosures. Inputs and outputs are isolated. They have protections for short circuit and over-current.

Tycon TP-POE-48 48V 24W Passive POE Inserter

Tycon TP-POE-48 48V 24W Passive POE Inserter

POE-MSPLT-4824P-F

The POE-MSPLT-48xxP-F is a unique splitter with dual outputs. It accepts 802.3af or 802.3at PoE and provides 48V PoE and 48V or 24V or 12VDC outputs concurrently so two separate devices can be powered. The DC output is provided on a standard 5.5mm/2.1- 2.5mm barrel connector and the Data/PoE output is provided on standard RJ45 network connector, each on a 6” cable. The DC connector is compatible with Tycon passive PoE injectors like POE-INJ-1000-S for ease of integration. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload.

Tycon Systems TPDIN-Monitor-WEB2 Powersens Remote Monitor/Control PoE

The PowerSens Web Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays. The system has built-in surge protection to prevent damage from electrical surges. On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access. The system allows control of the relays based on Voltage, Current, Temperature, Time or Ping Watchdog. This provides almost unlimited flexibility.

Tycon Systems EZBR-Ultra2-LR 100Mbps Long Range Point to Point Bridge System - Plug and Play44; 2GHz

The EZ-Bridge Ultra2-LR is a long range high capacity 100Mbps+ and high power 250mW outdoor wireless bridge system operating in the 2.4GH z unlicensed spectrum. The complete system allows for ultra high bandwidth connections between 2 buildings up to 8 miles or more apart with good line of sight. The EZ-Bridge Ultra2-LR creates a transparent bridge between 2 sides and passes all network traffic including VPN and DHCP. You can think of it like connecting a CAT5 Ethernet cable between the 2 points. It is the perfect high capacity plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge Ultra2-LR units can be connected in a mesh configuration to allow interconnecting more than two sites. The system supports 802.11 n TDMA and 802.11 g OFDM for backward compatibility. The advanced MIMO antenna system offers 18dBi of gain in a compact and visually pleasing package. The antenna also offers great front to back performance which helps reduce interference. A snap-on radome is included to protect the antenna from snow, ice, hail and crazy birds who sometimes like to nest in antennas. The antenna can be installed with Vertical Polarization or Horizontal Polarization, depending on customer preference. The corrosion resistant bracket system allows mounting to a pole with up to 2.25" diameter or wall mounting using the included wall mount brackets. The bracket provides +/- 20 degrees vertical tilt and unlimited horizontal adjustment. The EZ-Bridge Ultra2-LR comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including two powerful 18dBi 802.11 g/n MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, 24V PoE (Power Over Ethernet) power inserters and two 75' Shielded Outdoor Rated CAT5 cable assemblies.

Tycon Systems ENC-AL-65x18x20 Al Enclosure Hinged Lid & Lock

The sturdy outdoor enclosure is a gasket sealed aluminum enclosure designed for battery and equipment storage. It is vented and has two lockable latches for security. The enclosures are designed to be mounted on a level platform or slab. There are 8x 20 mm. holes in the back panel to accommodate up to 8 Cable Glands 4 RJ45 Cable Glands and 4 Hole Plugs included. There is a security bracket on the back of the enclosure so it can be easily chained to the solar mount pole for security or any other static structure. The enclosure includes mounting features inside to mount DIN Rails or a metal plate. The bottom standoffs allow for easy maneuvering with a fork lift or pallet jack.