Tycon Power TP-POE-HP-24 24V 36W High Power POE Power Source

The TP-POE Passive Power Over Ethernet Power Sources offered by Tycon Power Systems are quality power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the "R" model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).The TP-POE are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 100W. They are available in 18V, 24V and 48V DC Output with load regulation within 5%. The CI model has an special current sense LED which changes color when a POE device is plugged into the CAT5 cable. If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used. Features • Remotely Power Equipment thru CAT5 Cable up to 100m • Built in Ethernet Surge Protection • Autoranging Switching Power Supply • Short Circuit, Over Current and Over Voltage Protection • Medium Power and High Power Models Available • Various DC Voltage Outputs Available • High Temperature Operation • Compact size • Floor / Desktop / Wall Mount • CE / FCC / UL / CB Approved Applications • Wireless Access Points and Client Devices • IP Phone and Security Camera Systems