Clamp Meter HT206B 6000 Counts, 600A AC Ampere Meter, NCV 600V AC/DC Voltage Mesure, with LCD Backlit, Capacitance, Battery, Continuity, Resistance, Diodes, Temperture, Duty, Frequency Test

To measure Alternating Current Specifications: If current> 3A, the orange display lights up. The measuring range of AC current is 6A/60A/600A. Accuracy: ±(2.5%+5). Note: 1. To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A. 2. Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur. 3. This clamp meter does not support DC current measurement!! To measure AC/DC Voltage Specifications: Press the "FUNC." key to change the AC or DC voltage measurement. If the voltage is> 80 V, the orange display lights up. The measuring range of AC voltage is 6V/60V/600V. Accuracy: ±(1.0%+3). The measuring range of DC voltage is 600mV/6V/60V/600V. Accuracy: ±(0.5%+3). Note: 1.The voltage value needs to be measured using test leads, the clamp cannot be used directly. 2. This clamp meter does not support DC current measurement!! Features: Jaw Design The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation Weight & Size Weight :260g. Size: 7.5 x 2.8 x1.3 inches. Small and light, easy to carry when working. AC Current Measurement To measure AC current, you only need to clamp the live wire rather than the whole power cord. FUNC. Button Measurement Press the "Func." button to switch the respective secondary function between the different measurements such as between AC and DC. Automatic Shutdown No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically. Multi-Function Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes. Package included: 1 x clamp meter HT206B, 1x pair of test leads, 1x thermocouple, 2x AAA batteries, 1x user manual