Planet FGSW-4840S 48-Port 10/100TX + 2-Port Gigabit + 2-Port 1000X SFP Managed Switch

High-Density / Cost-effective Network Connection Solution
The PLANET FGSW-4840S is a 10 / 100 / 1000Mbps Ethernet Switch that provides 48 10 / 100Base-TX Ports respectively with 2 10 / 100 / 1000Base-T ports and 2-SFP Mini-GBIC interfaces. The FGSW-4840S offers wire-speed packet transfer performance without risks of packet loss. The high data throughput of this device makes it ideal for most Gigabit environments, especially upgrading network to a Gigabit environment.

The 48 Fast Ethernet Ports and 2 Gigabit Ethernet ports support 10 / 100Mbps and 10 / 100 / 1000Mbps Auto-Negotiation for optimal speed detection through RJ-45 category 6, 5 or 5e cables. All the ports also support Auto-MDI / MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. Moreover, the FGSW-4840S provides 2 SFP Mini-GBIC interfaces for fiber extension to uplink to a server or a network backbone as well.

Friendly / Advanced Web-Based Management
After configured IP address, the FGSW-4840S will shortly provide Smart management functions through the Web management interface. Functions such as per port speed, QoS settings, Trunking and port-based VLAN can be found in the friendly user interface of web browsers. The FGSW-4840S provides 802.1Q Tagged VLAN. The VLAN groups allowed on the FGSW-4840S will be maximally up to 256. And the FGSW-4840S also supports MTU VLAN (Multi-Tenant Unit VLAN) which means to the uplink ports and buildup several VLANs with each of the other ports. Each VLAN contains two ports, the uplink port and one of the other ports, in the FGSW-4840S, so the uplink port can communicate with any other ports but other ports can't communicate with each other. These features provide a cost-effective method to manage the devices from Internet whenever you are at work or at home.

Backbone Switch
With up to 17.6 Gigabits per second of non-blocking switch fabric, the switch can easily provide the high bandwidth for demands at present and in the future. Providing 48 Fast Ethernet ports with 2 Gigabit Ethernet ports and 2 SFP Mini-GBIC interfaces, the FGSW-4840S is ideal to be used as a server farm switch connecting to your servers and powerful desktops.

Department Switch
With 48 ports, the FGSW-4840S can connect up to 48 workstations in your Ethernet environment. The 4-Gigabit uplink to a department backbone via either 2 Gigabit ports or 2 SFP Mini-GBIC interfaces.

Physical Port

• 48-port 10/100Base-TX Fast Ethernet RJ45 copper, auto MDI / MDIX
• 2-port 10/100/1000Base-T Gigabit Ethernet RJ45 copper, auto MDI / MDIX
• 2 1000Base-X mini-GBIC/SFP slots
• Reset button for system factory default

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High-performance Store and Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
• - IEEE 802.1Q tagged VLAN, up to 512 VLAN groups, out of 4094 VLAN IDs
• - Management VLAN
• Supports Spanning Tree Protocol
• - STP (Spanning Tree Protocol)
• - RSTP (Rapid Spanning Tree Protocol)
• - MSTP (Multiple Spanning Tree Protocol)
• - Loop Guard, Root Guard, TC, BPDU Guard, STP BPDU Guard, BPDU Filtering
• Supports Link Aggregation
• - IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• - Cisco ether-channel (Static Trunk)
• - Maximum 6 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)

• Ingress / Egress Rate Limit per port bandwidth control
• Storm Control support
• - Broadcast / Unknown Unicast / Un