WT-AT-8-56v120w 802.3at on-Demand Gigabit PoE 8 Port Power over Ethernet Injector for PoE Cameras, IP Phones, Wifi Access Points, Includes 56 Volt 120 watt Power Supply with UL, DoE, FCC listings

Add gigabit PoE to any Switch • Proven reliability • Mix 10/100 and gigabit data rate and power on the same cable • For 8 devices with 120 watts total power • Power 802.3 at devices • Power Cisco, Meraki, Aruba 802.11 ac devices • 8 data in, 8 Data + PoE out • This is not a switch - use it to add PoE to any switch or router • Extend power to 328 ft or 100 meters • Power is off until a compatible device is connected Power supply included • 56 volts DC, 2.2 amps, 120 watts • 110 to 220 volt AC operation • 90% efficient • UL, DoE, CE and FCC listed Description These devices provide power and data in the same Ethernet cable using pins 1, 2 and 3, 6.

All devices receive the same voltage (48v) - total of all devices is 120 watts. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more.
Applications: • 802.11 ac WiFi access points like Aruba, Cisco, Meraki • IP Phones like Yealink Grandstream, Polycom etc • IP Cameras like outdoor dome cameras • any 802.3 at Device • 12 volt, poe devices (- please see our video on this topic) • USB, 5v and 12v, non-poe devices - please see our active splitters Other products from WiFi-Texas • see also our 10/100 and rackmount versions and switches • WT-AF-8-56v120w for 802.3 at • WT-GPOE-4-48v48w with 4 ports always on and lower cost • WS-GPOES-8-7-48v60w with integrated switch • WS-POE-8-48v60w for 10/100 speed data • WS-GPOE-16-48v120w for more ports • WS-POE-12-48v120w for 10/100 speeds and high power • WS-PoE-Tester to display power used by a device • WT-AF 5 and 12 volt splitters • Full details and data sheet at http: //wifi-texas. com/
UPC: 722512406575
SKU: ADIB01IODMB06