WT-GPOE-4 gigabit Poe injector for 802.3af devices - 4 Port Power over Ethernet wall mount with shielded RJ45 - POWER SUPPLIES AVAILABLE SEPARATELY

Add gigabit PoE to any Switch • Proven reliability • Mix 10/100/gigabit data and power on the same cable • Wall Mounted PoE injector for 4 devices • Power 802.3 af devices by connecting a 48v or 56v power supply • 4 data in, 4 Data + PoE out • this is not a switch - you use it to add PoE to any switch or router • extend power to 328 ft or 100 meters • Power is on all the time No power supply included • Power supply options from 18 to 56 volts, 15 to 240 watts, available separately • We recommend our 48 volts DC, 1 amp, 48 watts Power Supply • Power per port limited to 650 ma - self resetting fuses • 2.1 mm x 5.5 mm DC power jack Description These devices provide power and data in the same Ethernet cable using pins 1, 2 and 3, 6.

( 802.3 af Mode A) All devices receive the same voltage. Check device specs for power needs, it is under 4 watts for most phones, other devices need more.
Applications: • IP phones like Polycom, Cisco, Yealink • WiFi Access points • IP Cameras like Hikvision • any 802.3 af Device • 12 volt, poe devices (please see our video on this topic) • USB, 5v and 12v, non-poe devices - please see our active splitters Other products from WiFi-Texas • Also see our 10/100 and rackmount versions and switches • WS-GPOES-8-7-48v60w with integrated switch • WS-POE-8-48v60w for 10/100 speed data • WS-GPOE-16-48v120w for more ports • WS-POE-12-48v120w for 10/100 speeds and high power • WS-PoE-Tester to display power used by a device • WT-AF 5 and 12 volt splitters • Full details and data sheet at http: //poe-texas. com/
UPC: 752423138388
SKU: ADIB015S6ZWXK