Highly Thermal Conductive Epoxy, Pure Diamond Adhesive For Extremely Sensitive Thermal Cooling Applications 2 Part RT, AA-SUPERTHERM 05, 3gm Pouch

PRODUCT DESCRIPTION: AA-SUPERTHERM 05 is a thixotropic (smooth paste) Pure Diamond ultra-high thermally conductive epoxy two-part adhesive that develops strong, durable, high-impact bonds at room temperature which improve heat transfer while maintaining electrical insulation. AA-SUPERTHERM 05 bonds readily to itself, and to metals, silica, alumina, sapphire and other ceramics, glass, plastics and many other materials, because its coefficient of thermal expansion provides a good match for those materials over a fairly wide temperature range. Fully cured AA-SUPERTHERM 05 provides excellent resistance to salt solutions, mild acids and alkalis, and many other chemicals including petroleum solvents, lubricating oils, and alcohol. AA-SUPERTHERM 05 passes NASA`s outgassing specification making it ideal for demanding space applications. PRODUCT PROPERTIES: Appearance: Grey Cure Type: Heat cure or Room temperature Benefits: + Strong + Durable + High-impact bonds + Fully cured + Excellent resistance to many chemicals Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: metals, silica, alumina, sapphire and other ceramics, glass, plastics and many other materials Typical Applications: Extremely sensitive thermal cooling applications CURE SCHEDULE: 2 – 4 Hours: @ 65 °C 24 Hours: @ 25 °C UNCURED PROPERTIES: Viscosity @ 25 °C, 77.0 °F: 33,000 Cp @ 77.0 °F, 25.0 °C Specific Gravity, mixed: 2.30 g/cc Pot Life: 45 minutes MISC PROPERTIES: CTE, linear: 14.4 µin/in-°F@ RT Hardness, Shore D: 90 Izod Impact, Notched: 0.490 ft-lb/in ELECTRICAL PROPERTIES: Volume Resistivity: 2.10e+15 ohm-cm 3.20e+13 ohm-cm @ 167 °F Dielectric Constant: 5.9 @ 1000 Hz Dielectric Strength: 410kV/in, 16.1 kV/mm Dissipation Factor: 0.010 @ Frequency 1000 Hz THERMAL PROPERTIES: Thermal Conductivity: 7.36 BTU-in/hr-ft²-°F Glass Transition Temp, Tg: 48.0 °C, 118 °F Maximum Service Temperature, Air: 115 °C, 239 °F Minimum Service Temperature, Air: -70.0 °C, -94.0 °F GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). AVAILABILITY: This epoxy can be supplied in various different packages.