*Product availability is subject to suppliers inventory
Brand | PLANET |
---|---|
Model | GS-5220-8UP2T2X |
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ab 1000BASE-T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 RFC 2328 OSPF v2 |
Network Management Type | Managed |
Primary Ports | 8-Port 10/100/1000BASE-T with 72W PoE injector 2-port 1/10G BASE-X SFP+ RS-232 RJ45 console interface for switch basic management and setup |
MAC Address Table | 16K |
Switching Method | Store and Forward |
VLAN Support | Yes |
Jumbo Frames | 9KB |
PoE | Yes |
SNMP | Yes |
QoS | Yes |
LACP | Yes |
Port Mirroring | Yes |
LEDs | System: Fan Alert (Red), Ring (Green), SYS (Green), PWR (Green) 10/100/1000BASE-T RJ45 Interfaces (Port 1 to Port 10): 1000 Mbps LNK / ACT (Green) 10/100 Mbps LNK / ACT (Orange) 802.3bt PoE-in-Use (Green) (Port 1 to Port 8) 802.3at/af PoE-in-Use (Orange) (Port 1 to Port 8) 1/10G Mbps SFP Interfaces (Port 11 to Port 12): 1G LNK / ACT (Green) 10G Mbps (Orange) |
Power | Power Requirements: 100~240V AC, 50/60 Hz Power Consumption (Full Loading): 258 watts / 880 BTU (max.) |
Features | Physical Port: 8-Port 10/100/1000BASE-T with 72W PoE injector 2-port 1/10G BASE-X SFP+ RS-232 RJ45 console interface for switch basic management and setup Power over Ethernet: Up to 8 ports of IEEE 802.3af / 802.3at devices powered Supports PoE Power up to 72 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters PoE Management - PoE Port Status monitoring - Over Temperature Protection - PoE usage threshold - Temperature threshold - Per port PoE function enable/disable - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - Sequence port PoE Layer 2 Features: Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance of Store-and-Forward architecture and runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth Storm Control support - Broadcast / Multicast / Unknown unicast Supports VLAN - IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups, out of 4094 VLAN IDs - Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) - Private VLAN Edge (PVE) - Protocol-based VLAN - MAC-based VLAN - Voice VLAN - GVRP Supports Spanning Tree Protocol - STP, IEEE 802.1D Spanning Tree Protocol - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN - BPDU Guard Supports Link Aggregation - 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 6 trunk groups, up to 4 ports per trunk group - Up to 44 Gbps bandwidth (full duplex mode) Provides port mirror (many-to-1) Port mirroring to monitor the incoming or outgoing traffic on a particular port Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) |
Dimensions | 1.71" x 12.99" x 7.87" |
Weight | 4.41 lbs. |
Temperature | Operating Temperature: 0 ~ 50 degree Celsius Storage Temperature: -10 ~ 70 degree Celsius |
Humidity | 5% - 95%, Non-condensing |