High Temperature Epoxy Adhesive Glue, Fast Cure, Low Viscosity, 2 Part For LED Displays, Lenses, Fiber Optics Connectors, F131, 250gm

- PRODUCT DESCRIPTION: AA-BOND F125 is an 8 minutes gelling epoxy recommended for use in fiber optic connectors, optical and industrial bonding applications. AA-BOND F125 is clear, two part system is easily mixed and used at room temperature. Fiber optic connectors can be polished in as little as 15 to 20 minutes for piston free assurance. The high bond strength of AA-BOND F125 to glass, plastics, ceramics, metals and masonry allows it to be used in a wide array of applications including lens bonding, connector backfills, construction, component assembly and maintenance repair. AA-BOND F125 is low shrinkage epoxy, develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25°C is required for fully matured bonds. NOTE: AA-BOND F125 develops a high exotherm. Use immediately after mixing. The exothermic reaction begins within 2 minutes after initiating the mixing step, so have everything ready before mixing. - GENERAL PROPERTIES: • Components: 2 component - requires mixing • Mix Ratio by weight: 100:95 / Resin:Hardener • Benefits: o Low viscosity o Fast Cure o Low shrinkage • Cure Type: Room temperature or Heat cure • Operating Temperature : -60 to 100 °C • Typical Applications: Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications - UNCURED PROPERTIES: • Viscosity @ 25 °C: o Resin: 9000cP o Hardener: 14000cP • Specific Gravity : 1.19 • Pot Life: 5 minutes - CURE SCHEDULE: • 24 hours @ 25°C • 1 hour @ 60°C - CURED PROPERTIES: • Glass Transition (Tg), ultimate, °C: 40 • Hardness, Shore D: 75 • Tensile Shear, alum to alum, psi: 2800 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. CALL (888) 522-6742 for more informations.