High Impact Strength Epoxy For Electronic Industries, PCB, Aerospace, Staking Components, Bonding, Laminating, Repair, 2 Part 2110, 5gm

- PRODUCT DESCRIPTION: AA-BOND 2110 is a thixotropic epoxy resin and hardener formulation developed for industrial adhesive, staking, laminating, repair and manufacturing applications where long pot-life, good wetting, non-sag, non-drip and improved impact strength properties are required. AA-BOND 2110 is easy-to-use two parts adhesive system contains no volatile solvents, readily cures at room temperature, and bonds to most materials including glass and glass fabrics, ceramics, wood, leather, most metals, and many plastics. AA-BOND 2110 is strong, tough, resilient, has superior mechanical impact and thermal shock resistance characteristics, and is also highly resistant to weather, water, gases and vapors, most petroleum products and fuels, salts, mild acids and alkalis, and many other organic and inorganic compounds. - GENERAL PROPERTIES: Appearance: Hazy off white Cure Type: Room temperature or Heat cure Benefits: High Impact strength • Good wetting • Long pot life Mix Ratio by weight: 100:30 / Resin:Hardener Substrates: Staking components, bonding, laminating, repair applications, metals, glass, ceramics, wood and many plastics Operating Temperature: -70 to 100 °C Typical Applications: PCB components, aerospace, anything where superior properties are required - UNCURED PROPERTIES: Specific Gravity, mixed: 1.25 g/cc Viscosity @25 °C, cps: 65000 Pot Life: 1 hour - CURE SCHEDULE: 10 hours @ 65°C 24 hours @ 25°C - MISC PROPERTIES: Volume Resistivity: 9.30e+8 ohm-cm Dielectric Constant: 4.7 Dielectric Strength: 430 kV/in CTE, linear: 30.5 µin/in-°F @ RT Hardness, Shore D: 80 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. CALL (888) 522-6742 for more information.