Two Part Epoxy Long Pot Life, Impact Resistant For Fiber Optic Assembly Multimode & Single Mode Connectors, Small Potting & Sealing Applications F112, 5gm

- PRODUCT DESCRIPTION: AA-BOND F112 is an impact resistant, fiber-optic adhesive. AA-BOND F112 is two-part, low viscosity epoxy has the distinct advantage of remaining below 3000 cps for a minimum of 40 minutes. AA-BOND F112 allows more connectors to be produced from one mix. Low stress, AA-BOND F112 is an excellent choice for multimode connectors and single mode connectors where excessive curing temperatures may cause cracking. AA-BOND F112 can be cured at room temperature overnight or as fast as 15 minutes at 90°C. The blue color facilitates easy polishing and its cured properties prevent pistoning. This product is a 100% solid system that can be used for small potting and sealing applications where resistance to thermal shock and impact are required. - GENERAL PROPERTIES • Appearance: Blue • Components: 2 component - requires mixing • Mix Ratio by weight: 100:30 / Resin:Hardener • Benefits: o Low viscosity o Thermal shock and impact resistant o Low stress connections • Cure Type: Room temperature or Heat Cure • Operating Temperature : -60 to 100 °C • Typical Applications: Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications - UNCURED PROPERTIES: Viscosity @ 25 °C: 2300 Thixotropic Index: 1.0 Specific Gravity, cured: 1.2 Pot Life: 30 minutes - CURE SCHEDULE: 24 hours @ 25°C 1 hour @ 65°C 15 minutes @ 90°C - CURED PROPERTIES: Glass Transition Temperature (Tg), ultimate, °C: 102 Hardness, Shore D: 85 Refractive Index: 1.51 Water Absorption , after 24 hours saturation, %: 0.07 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. CALL (888) 522-6742 for more informations.